Series 2 bouncy springs

peter8315 · Sep 7, 2017

Just about finished my series 2a station wagon 12 seater resto, and took it out for a short trial run the other day and found the front end is bouncing up and down, so checked the new ****part shocks, and found them to have no resistance at all, so they went in the bin, got some monroe shocks and its still bouncing, so havn't checked if the monroe shocks are shot, but was thinking would parabolics be ok on the front only,

blue beasty · Sep 7, 2017

Shirley 'bolics on the front will make it even bouncier?

peter8315 · Sep 7, 2017

What you suggest then?

DarrenHS3 · Sep 7, 2017

OEM are armstrong, if you go on ebay and type the part number of your shocks you bought, but add armstrong, you will find them

p.s this is a long shot, but have you also fitted new springs recently ? (standard or otherwise) because its very likely when your truck is on the ground that the shocks are fully extended, i.e no droop travel, and this will be your issue.

tottot · Sep 7, 2017

What motor is fitted,different springs for petrol/diesel.

peter8315 · Sep 8, 2017

Its petrol now was diesel, and i think they are the origanal springs, its so bouncy its allmost undriveable

DarrenHS3 · Sep 8, 2017

diesel 11 leaf springs have 70lbs more spring rate.

Colthebrummie · Sep 8, 2017

Stick a frigging great winch on the front, that'll hold it down.

Col

Erubus · Sep 9, 2017

I'll swap you my tired 9 leaf petrol springs for your bouncy 11 leaf diesels

I've now got said frigging great winch on the front.

gill

Series 2 bouncy springs

peter8315

Active Member

blue beasty

Leaks an prone to bits dropping off

peter8315

Active Member

DarrenHS3

Active Member

tottot

Well-Known Member

peter8315

Active Member

DarrenHS3

Active Member

Colthebrummie

Well-Known Member

Erubus

Member

Similar threads