Disco 1 Body lift

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
LukeD1

LukeD1

Member
Posts
41
Location
Norwich
Does this look right or do I get rid of the rubbers to make the bolts fit?
 

Attachments

  • IMG_0275.JPG
    IMG_0275.JPG
    256.3 KB · Views: 235
looks like you forgot to undo the steering column, shouldn't be leaning like that. Also, check that the lift pump isn't snagging either.
 
lol dont get me started on things that need doing i ended up replacing 6 body mounts on mine due to the dreaded tin worm and the previous owners attempt to repair! i think some people really think they can repair rot with a piece of tin and loads of silicone and underseal :eek:
 
LukeD1 said:
Too right! I would like to replace my dolls with box section
Click to expand...

Box section is THE way to go. :D

Did my D1 with 3.6mm box section and didn't need to put rock sliders on. Tree sliders would have been nice though, however, you could just weld them on the side. ;)
 
You must log in or register to reply here.

Similar threads

H
Water hose in throttle body
Replies
7
Views
371
discool
discool
MAF Diver
Disco 2 Too much play in front driveshaft? Loud clank when accelerating
Replies
2
Views
301
Henry_b
Henry_b
styleruk
Rear slide window inserts
Replies
16
Views
1K
styleruk
styleruk
R
Garage lift options and lift safety
Replies
18
Views
1K
Graculus
Graculus
H
D2 ABS Sensors
Replies
3
Views
239
sierrafery
sierrafery
Back
Top