L322 Bluetooth 2003
- Thread starter Mikey563
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
RRkev
Active Member
- Posts
- 430
- Location
- Forest of Dean, Gloucestershire
yes but you need a plug in adaptor cable from the current phone module to the ulf as the wiring is different, you can also fit the phone cradle in the centre console arm rest but this also needs an adaptor cable to work, do a google search and you will find the relevant info, however you need a 5th generation or later ulf, and you will need someone with access to navcoder to enable the voice recognition.
if you have a vogue there is a separate voice recognition unit under the nav drive in the boot, you need a bypass plug for this too if using the ulf voice recognition
if you have a vogue there is a separate voice recognition unit under the nav drive in the boot, you need a bypass plug for this too if using the ulf voice recognition
tarphenry
Well-Known Member
- Posts
- 1,540
- Location
- bury lancs
Is this written in Esperanto, ,cause I didnt understand a f!!!!!!!! word of it
RRkev
Active Member
- Posts
- 430
- Location
- Forest of Dean, Gloucestershire
yes there are kits available it would depend if you have telephone pre-wiring or not as the kits are different plus you would need the mic, and optional arm rest tray etc. take a look here and this will give you an idea of whats needed, you can also buy the whole kit from rover upgrades
http://www.roverupgrades.com/Rover_Bluetooth_Installation_Instructions.html
http://www.roverupgrades.com/Rover_Bluetooth_Installation_Instructions.html
That looks like a lot of help thanks Will have a look in the trips see what is in their
Thanks for your help
Mike
