Evoque Blind spot not working just a yellow spot in the left mirror it some time comes on and off.

Good afternoon it has been a long time science I have been logged on, I have had a freelander 1 and the I had a freelander 2 was very happy with them and now have now got a Range Rover Evoque Automatic 2 Litre Diesel five door very happy with it but the, Blind spot not working just a yellow spot in the left mirror it some time comes on and off and the waring triangle on the information centre .any one who can help please.

The yellow spot is a 'self test' and should be there when stationary, disappearing when above 3km/h. There are a few possible causes, defective mirrors, defective RADAR behind the sides of the rear bumper, defective / corroded / damaged wiring to the RADAR sensors, loose or damaged sensors / mountings. Unless you enjoy wasting time & money, you need to have some form of OBD diagnostics that can interrogate all vehicle systems, not just the 'big four'.

Good evening thank you for your input I have put a OBD on and it gave no codes the yellow spot is on all the time when driving it is only on the left mirror and not on the right mirror it is a annoyance .
Thank once more.

Then it could be the right mirror LED module is faulty - which would set a DTC, are you sure can you read all modules?

Not sure will do a other scan thanks.

You should be looking for SODL & SODR on MS-CAN (co). It's not unusual for 'low voltage' DTC's to be stored, these only register during cranking and don't affect functionality.
These modules are VIN coded so will throw U2100 or U3002 codes if the module is improperly coded or swapped from another vehicle.

Thank you that is a great help, Thanks

Good afternoon with refence to my last post about the Blind Spot Mirror I have had to take it to my local garage ,he has a very large OBD meter so I booked it in ,and this morning took it in and within twenty minuets he found a hundred and fifty nine codes he then took the car for a run it seems to be ok now all working very happy with it.
I thank Graulus for his in put and the the landy zone for all the help.
Moonraker.

So what was the actual fault that he fixed?

J

marjon said:

So what was the actual fault that he fixed?

J

Click to expand...

Lack of proper diagnostics by the sound of it.

marjon said:

So what was the actual fault that he fixed?

J

Click to expand...

Sorry forgot to say it was the ECU it was full of codes once he cleared them out all the codes out the yellow spot in the left hand mirror has gone and it is running fine and still working ok.

Wow, 159 codes. That's one smooth running machine.

Presumably historic codes rather than current faults, perhaps due to a battery problem in the past.

That's a lot of fault codes.
Good to see it's working again.

Now you just need to fix the thread title, so it says "solved" !!

pwood999 said:

Now you just need to fix the thread title, so it says "solved" !!

Click to expand...

When did that start?!

Grrrrrr said:

When did that start?!

Click to expand...

It's nice when people do as it helps people when others are searching through the threads if they have the same issue. It's really irritating when people fix their issue with help and don't come back to say it's done, how will anyone know what the fix was?

Grrrrrr said:

When did that start?!

Click to expand...

When people fixed things, allegedly .