Bl**dy clutch now !!!

baniradley · Apr 3, 2011

My 1987 90 with LT77 gearbox is playing up. 1 week ago clutch was fine then all of a sudden the clutch goes almost to the floor before disengaging, checked fluid, it was fine and I can't see any leaks. Anyone got any ideas ?

jamesmartin · Apr 3, 2011

air in system from m/c or s/c,nut loose on m/c rod in pedal box under top plate 6x screw

Karlos28 · Apr 3, 2011

Or the fork has worn through?

pat murphy · Apr 4, 2011

cylinder rod has gone through the fork gearbox out im afraid

Karlos28 · Apr 4, 2011

pat murphy said:
cylinder rod has gone through the fork gearbox out im afraid

That's what I meant!

jamesmartin · Apr 4, 2011

if it was the fork worn and pushed over pivot wouldnt the pedal stay jammed or loose all pressure ,if still working put low down ,air or adjustment

tankduck · Apr 5, 2011

sounds like a more extreme version of what happened to mine, James worked that one out for me (love ya james

) but yeah, the two nuts that adjust the level of the clutch pedal on mine had vibrated so that the clutch disengaged too near the floor, and as such made it difficult to change gears. Maybe worth a look, will only take you 5 minutes.

baniradley · Apr 8, 2011

Thanks guys for all your advice, special thanks to "tankduck" his suggestion was spot on.

Bl**dy clutch now !!!

baniradley

New Member

jamesmartin

Well-Known Member

Karlos28

Well-Known Member

pat murphy

Active Member

Attachments

Karlos28

Well-Known Member

jamesmartin

Well-Known Member

tankduck

Active Member

baniradley

New Member

Similar threads