discodrivercumbria
Well-Known Member
- Posts
- 3,317
- Location
- South lakes
like the colour, be able to find that in asda! unless the RAC men are in there
Bit more progress
- Thread starter Tuskenraider
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Tuskenraider
New Member
- Posts
- 1,248
- Location
- Basildon, Essex
Got these to fit over the weekend hopefully
Durlite Oil Temp Gauge
Durlite Oil Pressure Gauge
Durlite Coolant Temp Gauge
10 twin LED amber marker lights
Beacon switch
Front Work light Switch
Rear Work light Switch
12v Socket
Mud Pod
Int/Ext Temp & Clock
The marker lights are going to be wired via a modified control box i got off ebay with the cheap chinese LEDs and then activated by the switch.
Durlite Oil Temp Gauge
Durlite Oil Pressure Gauge
Durlite Coolant Temp Gauge
10 twin LED amber marker lights
Beacon switch
Front Work light Switch
Rear Work light Switch
12v Socket
Mud Pod
Int/Ext Temp & Clock
The marker lights are going to be wired via a modified control box i got off ebay with the cheap chinese LEDs and then activated by the switch.
Last edited:
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
Well its changed a bit more and now looks like this
Picked up some modulars and painted them black with the orange highlights. Also fitted Bullbar, steering and diff guards, 4 spots front and 2 rear
Quite happy how its coming along now
look abit like mine
DiscoNickY
New Member
- Posts
- 744
- Location
- Liverpool
U really want to be seen u don't ya?! Bright friggin orange and lights all over the place!! See u cumin a mile off. Haha. NATO green an black for me an only necessary spot lights. I like to go places I'm not meant to........
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
is that wise
DiscoNickY
New Member
- Posts
- 744
- Location
- Liverpool
Yes. Aslong as well behaved and don't act like a bafoon then all is well.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,113
- Location
- Gloucestercotshirewolds
Generally speaking going places you're not meant to IS behaving like a baffoon :suspicious:
DiscoNickY
New Member
- Posts
- 744
- Location
- Liverpool
Don't think so mate.
Tuskenraider
New Member
- Posts
- 1,248
- Location
- Basildon, Essex
Well made a start on the electrical stuff plus had my new exhaust to fit
Old v New
New middle pipe
Not sure how long this will last
I also modified the washers to get a bit better coverage on the screen.
Replaced side repeaters with 2 of the LED marker lights
and i made my pod up
So let to do is.....
Fit Pod to dash
Replace oil filter housing wth modified one with senders in
Remove oil cooler lines
Fit rest of marker lights and wire into beacon controller
Nice to find out then its getting cold this week
Old v New
New middle pipe
Not sure how long this will last
I also modified the washers to get a bit better coverage on the screen.
Replaced side repeaters with 2 of the LED marker lights
and i made my pod up
So let to do is.....
Fit Pod to dash
Replace oil filter housing wth modified one with senders in
Remove oil cooler lines
Fit rest of marker lights and wire into beacon controller
Nice to find out then its getting cold this week
Last edited:
carlb40
Active Member
- Posts
- 119
- Location
- Birmingham
Good build fred, given me some ideas
DiscoNickY
New Member
- Posts
- 744
- Location
- Liverpool
Like the washer idea. Always a problem for me that. How did u do it?
Tuskenraider
New Member
- Posts
- 1,248
- Location
- Basildon, Essex
Removed the washer jets from the cowling, extended the hose with some clear tubing upto each wiper, fitted the jet on the end and cable tied it to the wiper
quattro6999
New Member
- Posts
- 295
Removed the washer jets from the cowling, extended the hose with some clear tubing upto each wiper, fitted the jet on the end and cable tied it to the wiper
If you want to go one better, get the jets off a peugeot 407 as they give a brilliant fan pattern that doesn't clog up
Co-Pang-Yang
Well-Known Member
- Posts
- 2,930
- Location
- Colchester, Essex
Or a Vauxhall Insignia
Tuskenraider
New Member
- Posts
- 1,248
- Location
- Basildon, Essex
I am not devaluing my Landy with Vauxhall parts thank you
chrisyleigh
Active Member
- Posts
- 773
Nothing wrong with vauxhall parts !insignia washer jets are a very common mod
Tuskenraider
New Member
- Posts
- 1,248
- Location
- Basildon, Essex
When you realise I work for Ford you will understand there is
DiscoNickY
New Member
- Posts
- 744
- Location
- Liverpool
When you realise I work for Ford you will understand there is
Shouldn't u be driving a ranger or an f150 or a similar piece of American sh*te?!?
Tuskenraider
New Member
- Posts
- 1,248
- Location
- Basildon, Essex
Probably but as Ford owned JLR for a good number of years I consider it the next best thing
Co-Pang-Yang
Well-Known Member
- Posts
- 2,930
- Location
- Colchester, Essex
I am not devaluing my Landy with Vauxhall parts thank you
screw you blue oval hippy!
