Billy B
Well-Known Member
- Posts
- 2,305
- Location
- The Kingdom of Devon
I got the Valeo one, not over the top but the britpart one looked terrible
Billy's budget defender project
- Thread starter Billy B
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dan_Trials
Well-Known Member
- Posts
- 2,546
Both seem about the same price, will keep them in mind when the time comes. Yeah I wouldn't fit Britpart on some thing that's such a pain to get at if/when it goes wrong!
Billy B
Well-Known Member
- Posts
- 2,305
- Location
- The Kingdom of Devon
I will give it a good run today and next weekend,and finally got the pics uploaded
Gearbox out
Fork was worn
Got the old clutch out and found out what the rattling noise was !
New clutch in
Took a pic of the disc off the disco, that was very close
Gearbox out
Fork was worn
Got the old clutch out and found out what the rattling noise was !
New clutch in
Took a pic of the disc off the disco, that was very close
discomark10
Well-Known Member
- Posts
- 3,977
- Location
- Milton Keynes
blimey, what happened to that disc?
Billy B
Well-Known Member
- Posts
- 2,305
- Location
- The Kingdom of Devon
The calliper failed and the pad got pushed onto the disc, believe it or not the brakes worked fine and it didn't make a sound, only noticed because I decided it was time to check the pads
On the other side of the disc it's worn right through!!!!!
On the other side of the disc it's worn right through!!!!!
Billy B
Well-Known Member
- Posts
- 2,305
- Location
- The Kingdom of Devon
Been too busy to work on the 90 recently, but I want to build my own cubby box, anyone got any good pics?
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
You're not the only one billy, Hopefully it wont be too bad when I go back next week
As for a cubby box have a look in the "what have you done to your landie today" thread. Looks impressive to me
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Yep, Ive been working harder on feeding and watering the shedloads of visitors than I do at work
Don't have any great pics I can measure my cubby box if ya want
Billy B
Well-Known Member
- Posts
- 2,305
- Location
- The Kingdom of Devon
Cheers fellas, that cubby is spot on
Fixed the indicators again, poxy hazard switch again!!!!!!!!!!!
Fixed the indicators again, poxy hazard switch again!!!!!!!!!!!
Billy B
Well-Known Member
- Posts
- 2,305
- Location
- The Kingdom of Devon
Found the mystery squeak that's been plaguing me, front prop seized and ujs had it, finally going to get it right before I work away for 3 months
xaby82
New Member
- Posts
- 47
- Location
- Aberdeen (ish)
Just read the whole thread from start to finish! Was moaning about getting out to give mine a service. You sir are an inspiration.
Top job!
Top job!
