best discovery
- Thread starter omlette
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Zed.
Well-Known Member
- Posts
- 1,842
- Location
- Deepest Bandit country (Wales)
Define best.
Off road probably the D3 with suitable mods. On road, definitely the D3/4.
However the D2 will be more reliable, and has a wider range of specialist components available for it, as long as you can find one that's not rusted away.
Off road probably the D3 with suitable mods. On road, definitely the D3/4.
However the D2 will be more reliable, and has a wider range of specialist components available for it, as long as you can find one that's not rusted away.
Interceptorxj
Well-Known Member
- Posts
- 1,718
- Location
- Bolton, Greater Manchester.
my 2p, D1 200tdi (because I've got 2)
And it is actually the best !
- Posts
- 22,902
- Location
- In the next Glen
For off road its a D1 200tdi or 300tdi non abs,cheap to modify & repair out of all the discos
that would be my choice, no electronic gremlins to chase for weeks on end.
D2 air lets it down if you bust a pipe or bag early model without ace & cdl more expensive to mod
ecu needs raised up if you end up wading too deep or your screwed then youd wished youd
bought a D1.
D3 & D4s can fuck off.
A galvanised chassis doesnt make it better off road....
that would be my choice, no electronic gremlins to chase for weeks on end.
D2 air lets it down if you bust a pipe or bag early model without ace & cdl more expensive to mod
ecu needs raised up if you end up wading too deep or your screwed then youd wished youd
bought a D1.
D3 & D4s can fuck off.
A galvanised chassis doesnt make it better off road....
- Posts
- 5,166
- Location
- South Bucks
As above, D1.
Best looking, more pure lines.
And I have a minter
Best looking, more pure lines.
And I have a minter
Zed.
Well-Known Member
- Posts
- 1,842
- Location
- Deepest Bandit country (Wales)
- Posts
- 44,817
- Location
- East Dorset
+1^^^^^
Sure they rust but they are simpler to work on and can be tuned to bits with better turbos, bigger intercooler, better exhausts and fiddling with the fuel pump.
I'll never get rid of mine but I would get rid of the TD5. (Rust in chassis and electronix, even though both have been fixed, well the electronix seems to be a continuous feast of needing fixing. )
Sure they rust but they are simpler to work on and can be tuned to bits with better turbos, bigger intercooler, better exhausts and fiddling with the fuel pump.
I'll never get rid of mine but I would get rid of the TD5. (Rust in chassis and electronix, even though both have been fixed, well the electronix seems to be a continuous feast of needing fixing. )
frostythor
Well-Known Member
- Posts
- 608
- Location
- NEW FOREST
No matter what Discovery you have, by the time you have fixed it you may be out of cash, people do spend a lot " upgrading" but for the next buyer it’s a mod they may not want, as most cars a already made to be reasonably at optimum performance for a whole range of differing job, when you improve one item you may be reducing it performance in another area, as for my own I just keep it original and in a decent running order, and as it a landrover wash it at least once a year, for it MOT
D1 on a galv chassis - completely bullet proof. Either 200 or 300 Tdi - but watch the electronics on the 300's - the MFU's get fried by new alternators with high voltage set points = instant MOT fail due fog lights and such not working ..
If you can't weld, then I suggest either you learn, and bl#*dy quick, or go and buy a modern ****boxtronic money pit
The 5 door rear arches are an easy fix - try it on a 3 door, and then come complaining about the 5 door
And, yes I have done both - here's SWMBO's 3 door n/s done..
Taking the side panel off was such fun - almost as much fun as putting it back on!!
..If you can't weld, then I suggest either you learn, and bl#*dy quick, or go and buy a modern ****boxtronic money pit
The 5 door rear arches are an easy fix - try it on a 3 door, and then come complaining about the 5 door
And, yes I have done both
- here's SWMBO's 3 door n/s done..Taking the side panel off was such fun - almost as much fun as putting it back on!!
- Posts
- 5,166
- Location
- South Bucks
Not all D1's are rust buckets, some are very clean.
Had a LR Indy do some engine work on my one and he couldn't believe how nice it was, said it's the best he seen and worked on in years.
When we went to the Gaydon LR day, peeps were amazed at the condition of it.
So they do exist.
discool
Well-Known Member
- Posts
- 13,608
Plus a petrol engine with eight cylinders… then its job done.
Plus a petrol engine with eight cylinders… then its job done.
I had one years ago in a bob til rr, never had so much trouble with an engine and water ever in my life, mates boy had a Niva that fared much better, that gave no bother at all, put me off the rover v8 for life.
Similar threads
