Belt pulleys

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

Shedfirkler99

New Member
Posts
1
Location
Mid-Wales
Judging by the squeal, the bearing of (at least) one of the pulleys looped by the alternator/etc belt of my Disco 1 300tdi is worn. Is there any way of identifying which one without major dismantling? And if I have to replace it, will it be necessary to remove the radiator first? I suspect there are no short cuts...Thanks!
 
As said try the penny trick , undo the belt tensioner & put a penny in the 9'oclock position & tighten back up. 15mm ring spanner , if that don't stop it replace the tensioner. Cheap & easy , you don't need to do anything to the radiator.
 
Thomo1927 said:
As said try the penny trick, remove the belt, slacken (but do not remove) the belt tensioner & place a penny in the 9'oclock position between the block and the tensioner & tighten back up. 15mm ring spanner , if that don't stop it replace the tensioner. Cheap & easy , you don't need to do anything to the radiator.
Click to expand...

But you do need to remove the viscous fan.
 
thebiglad said:
There's the hard way and the easy way of doing something.

If you remove the fan, you can then directly deal with the tensioner.

How are you going to remove the plastic cowl on a TDi 300, with the fan in place?
Click to expand...

Maybe the wrong word , I meant the plastic cover on top of the fan. I did mine in 20 mins with the fan in
 
You must log in or register to reply here.

Similar threads

Maat
Disco 1 Getting the idle revs right
Replies
2
Views
599
Maat
Maat
M
Can a broken injector pump require change of timing belt?
Replies
1
Views
353
Anaconda
A
F
Auxiliary belt
Replies
7
Views
867
freelandertd4bmw
F
1
Broken Timing Belt
5 6 7
Replies
126
Views
6K
109Santana
1
A
Help D3 Suspension
Replies
3
Views
493
Andrew bibby
A
Back
Top