Back after 5 years EAS?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
You can at the moment continue to make contributions to you UK state pension.
Got an old fridge, will that do instead of the washing machine?
I don't even remember who I payed into to be honest.
A fridge will do and a small heap of scrap and a bin full of rubbish kicked over and you should be somewhere near.... Oh, and a tied up scabby dog!!!
 
Maybe just shave a couple of baldy spots on him:eek::D and don't forget the rubbish bin:p
I'll worry about the pension for what it was worth when I need to. ;)
Pension wont be worth a lot, but every little helps as they say.
I need a picture of you so I can train my dog to bite you if you every visit for being nasty too him:p:p
 
Pension wont be worth a lot, but every little helps as they say.
I need a picture of you so I can train my dog to bite you if you every visit for being nasty too him:p:p
IMG_20190718_160646.jpg
:p;)
 
You just never know who is on the other end of a thread!!:D
Will use that photo to make my dog jealous :) France is a way off and fortunately moved a bit into Euros 5 years ago but not enough.
We have been all over France as said come over at least 5 times a year. We are also looking at the distance from Calais as we have 2 boys and prefer driving to flying will keep everyone posted
On another note bought a nanocom for the p38 and it says it is a faulty height sensor on front nearside so will replace it makes sense as it is constantly adjusting
Engine fault is a lambda sensor
and hevac fault is a blend motor
So pretty good really
Just replaced front nearside drive shaft on the l322 so nearly there with them for a week or two
 
Will use that photo to make my dog jealous :) France is a way off and fortunately moved a bit into Euros 5 years ago but not enough.
We have been all over France as said come over at least 5 times a year. We are also looking at the distance from Calais as we have 2 boys and prefer driving to flying will keep everyone posted
On another note bought a nanocom for the p38 and it says it is a faulty height sensor on front nearside so will replace it makes sense as it is constantly adjusting
Engine fault is a lambda sensor
and hevac fault is a blend motor
So pretty good really
Just replaced front nearside drive shaft on the l322 so nearly there with them for a week or two

I would check sensor wiring connectors first. Sensors seem pretty robust but connectors are crap.

If you put a voltmeter on it and move the sensor you should see voltage changing smoothly.
 
Back
Top