auxillary heater

Dave the builder · Aug 29, 2020

hi guys just after some info. when i press the `on` button on the remote to activate the aux heater the `on` light flashes continuously and the heater doesnt work. has anyone had this problem ? any help is much appreciated. dave

rob1miles · Aug 29, 2020

What vehicle (I believe some are canbus some are not) and what heater? Some are easy to reset if locked out, some are not.

Dave the builder · Aug 30, 2020

rob1miles said:
What vehicle (I believe some are canbus some are not) and what heater? Some are easy to reset if locked out, some are not.

hi its a 2011/12 RR l322, i have no idea regarding canbus or heater sorry. hope this info helps. dave

Europa486 · Aug 30, 2020

Battery voltage is paramount with Auxiliary diesel heaters otherwise the glow plug won’t reach the correct temperature for a start up,

Dave the builder · Aug 30, 2020

Europa486 said:
Battery voltage is paramount with Auxiliary diesel heaters otherwise the glow plug won’t reach the correct temperature for a start up,

thank you i shall have battery checked.

Nodge68 · Aug 30, 2020

Dave the builder said:
hi its a 2011/12 RR l322, i have no idea regarding canbus or heater sorry. hope this info helps. dave

Flashing light suggests a faulty heater, possibly locked out. When was the burner cleaned out?

rob1miles · Aug 31, 2020

Probably locked out, often low volts. Try resetting. It can be quite a faff, try googling the sequence for your model heater. If you have an OBD2 you may be able to reset the codes, the software can be got free but its far from easy to get it all to work..

auxillary heater

Dave the builder

Member

rob1miles

Well-Known Member

Dave the builder

Member

Europa486

Well-Known Member

Dave the builder

Member

Nodge68

Well-Known Member

rob1miles

Well-Known Member

Similar threads