andytd4auto
New Member
- Posts
- 1,026
- Location
- on the other side!!!
wanna fit the grey aux socket but not the expensive landrover way,
snip snip wires
anyone done it?
snip snip wires
anyone done it?
aux towbar socket
- Thread starter andytd4auto
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
yella
New Member
- Posts
- 15,991
scotchlocks 
G13SJC
New Member
- Posts
- 735
- Location
- Nuneaton, Warwickshire
My kit was only £40 from the dealer. Consists of two relays, 1 voltage sensitive switch, the socket, mounting plate, cables and relay mounting plate.
Would cost this to price individually.
If you have all the parts you could wire a negative to a bolt behind the rear plastic interior boot panel and run a positive cable from the battery to the socket (using a relay switched to an ign source).
Regards,
Steve
Would cost this to price individually.
If you have all the parts you could wire a negative to a bolt behind the rear plastic interior boot panel and run a positive cable from the battery to the socket (using a relay switched to an ign source).
Regards,
Steve
ming
SPACE TWOT
- Posts
- 11,977
- Location
- PLANIT ZOG
I used tow equipe indicator sounder and used ther wiring diagram and like yella sis use block crimps or better still male un female blue [10amp] crimps . . . .it wer easy
