auto box rattle

D

dave_mito

New Member

Posts

34

• Jun 17, 2013

• #1

my disco has a very loud rattle when first started, but goes away after a few min.

it does it in drive, neutral or revers ect ect.

oil level seem ok.

Does any one have any pointers, ive never really looked into anything auto box wise and don't know were to start.

 

F

fireblade7

Active Member

Posts

487

Location

edinburgh scotland

• Jun 18, 2013

• #2

if its nackered i have 1 in scotland

 

J

janderson41

Active Member

Posts

442

Location

Howwood Renfrewshire

• Jun 19, 2013

• #3

Hello Dave
What makes you think it is the autobox?
Can you give better description.
Have you tried putting it up on ramps or over a pit and start it with someone underneath?

Jim
____________________
1996 300 Tdi auto(jap reimport)

 

jamesmartin

Well-Known Member

Posts

91,879

Location

louth lincs

• Jun 19, 2013

• #4

id look at torque convertor and drive plate if not exhaust or shielding

 

D

dave_mito

New Member

Posts

34

• Jun 21, 2013

• #5

been underneath and the noise is is around the box area. would low oil cause a noise or would that only be when driven.

Is there anything I can check with out taking the box out.

 

D

dave_mito

New Member

Posts

34

• Jun 23, 2013

• #6

forgot to mention after say a minute of idling it starts to go intermittent and after another min of so it stops completely.

will try and record it later.