auf_wiedersehen_pet's build thread.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
You'd need to ask Roger - he'll be along soon.

It certainly bolts straight on but my raised spare wheel holder is cut away on one side to allow for the wiper. The arm is more curved on the D2. I've never had it fitted with a standard holder.
 
I had the same problem. I to had to cut away the spare wheel holder. But yes it is a straight swap. You will have to decide if you want the D1 or D2 or both of the washer jets working. Seeing that I had my roof lining down at the time it was very easy for me to connect up the D2 washer jets. All I used was fishing aquarium tubing and connectors.
 
Hmmm good info there cheers lads. I shall have to keep an eye out for a D2 in the local breakers.
Also think I'm gonna paint my boot door card black like yours, looks much better. Want the bonnet checker plate too but it's so bloody expensive!
 
think I'm gonna paint my boot door card black like yours, looks much better.

Ah, ah! It's not a door card, it's a camping table! :eek::eek::eek:

IMG_7101_zps8c0cc531.jpg


IMG_7107_zps273e8d71.jpg


IMG_7106_zps0557fe6a.jpg


IMG_7105_zps37e06b33.jpg


IMG_7109_zps04ad27f3.jpg


IMG_7100_zps5ca5b998.jpg


IMG_7099_zps68117d2d.jpg


IMG_7098_zpsa6e951aa.jpg


IMG_7110_zps05b6d81c.jpg


IMG_7111_zps45bdf1a3.jpg


IMG_7112_zpse49eba3a.jpg


IMG_7113_zps7a8db055.jpg
 
Been off this forum for a while, back on as ive just purchased a Disco, took me 3 days to get through this thread, what a cracking truck, I love it, well done!
 
Back
Top