ARB and banging

lyndbo · Jul 31, 2016

Been having banging when turning sharp bends ,so I have checked it and the actual bar moves from side to side ,surely that's not meant to be ,not like the ARB's I've come across .

Nodge68 · Jul 31, 2016

It's supposed to fixed in the middle by a couple of clamps. However the clamps are made of plastic and break after a few years. A couple of worm clips, clamped round the bar, each side of the bushes will do the job of keeping the bar central.

lyndbo · Jul 31, 2016

Lol ,there's no plastic clamps on this ,I can see clamps and bushes either end of the straight length but no plastic clamps ,I should say its a 1999 xedi

Nodge68 · Jul 31, 2016

lyndbo said:
Lol ,there's no plastic clamps on this ,I can see clamps and bushes either end of the straight length but no plastic clamps ,I should say its a 1999 xedi

That's because they have cracked and fallen off

. It's relatively common for that to happen. The bar rusts, which then swells, splitting the plastic clamps, which then just fall off. The bar is then free to slip sideways, and stike the strut, causing the bang.
My 05 SE now has a pair of worm clips keeping the bar in the middle and knock free.

lyndbo · Aug 1, 2016

Thanks for that ,I thought it was just the bushes worn .

lyndbo · Aug 4, 2016

Nodge68 said:
That's because they have cracked and fallen off. It's relatively common for that to happen. The bar rusts, which then swells, splitting the plastic clamps, which then just fall off. The bar is then free to slip sideways, and stike the strut, causing the bang.
My 05 SE now has a pair of worm clips keeping the bar in the middle and knock free.

lyndbo · Aug 4, 2016

I've put some clips on and noticed the ARB bushes need changing,checked the links and one had snapped ,so bushes done and links tomorrow.

ARB and banging

lyndbo

Active Member

Nodge68

Well-Known Member

lyndbo

Active Member

Nodge68

Well-Known Member

lyndbo

Active Member

lyndbo

Active Member

lyndbo

Active Member

Similar threads