Disco 2 Anyone scrapping a D2 wirth ACE?

I am looking for two ACE sensors, one behind the front interior light, the other is under the driver's footwell accessible from under the car.
For this one, I also need the wiring that connects it to the main body loom. I'm hoping that will connect somewhere in the cabin by the driver's side kick panel.

Try this:
Discovery 2 Parts
Quality Used and New Parts & Accessories
Call Paul on
01206 211623 - office
07828 278465
07760 955966
07840 428888

as about the loom, check well in that area cos the connector might be there, if it isnt it's connected directly to the ACE ECU plug so if the ECU connector is there behind the glovebox the accelerometer's plug must be there too

Thanks for the info, will give them a call.
We did speak about this before on the forum when I was trying to decide whether it was worth retrofitting my non-ACE with ACE. I've been looking for the sensors ever since.
So, my non-ACE vehicle may or may not have the required connection in the footwell and since I don't know what the connector looks like, I won't know if I find a spare connector, if it's for ACE or not.
I was hoping that someone would be able to whip the lower sensor off with a short cable attached or even if they have the driver's kick panel off, they could take a photo of where the lower sensor connects to.

I dont remember our discussion but if your non-ACE vehicle was so from factory then forget about retrofitting it cos it's misssing the chassis harness too for the valve block and other circuit links too... and if it was fitted with ACE and converted to classic ARBs the accelerometer's plug should be there