anyone got a 1987ish 2.5TD? and would be prepared to take some photos of wiring?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

Silly Tilly

New Member
Posts
221
Location
Shepton Mallet
If anyone out there has a Landy about the same age and the same model as mine I would really, really appreciate a photo or diagram of the wiring at the rear of the ignition switch and the fuse panel.

My ignition switch is the one with the black end, two larger terminals and three smaller ones, there is a brown, brown/red, white, white/red & white/black wire at the back, could do with a photo showing which wire goes where.

Also could do with a photo of each of the three relays that are located behind the fuse panel.

I realise that this is a bit of a faff but boy would you be helping a Newbie in trouble!!!!!

Thanks in advance x
 
I have 1986 2.5 n/a ex mod. But engine don't matter on wiring diagram they are all same I believe except the miltary as different wiring but what is your specific question ? It is to rewire or summat. There is wiring diagram on here that u can download
 
Taffy said:
I have 1986 2.5 n/a ex mod. But engine don't matter on wiring diagram they are all same I believe except the miltary as different wiring but what is your specific question ? It is to rewire or summat. There is wiring diagram on here that u can download
Click to expand...

Having real problems around the ignition switch area, trouble is too many cooks have had a go and I am now totally confused.

I could really do with a pic of the rear of the ignigion switch, I marked the cables when I took them off but now doubt myself and need to double check everyting to find this pesky fault!!!!
 
Ratty yes I am as sure as I can be, it is identical to the one I took out originally the part number is QRF100870. Thanks Taffy, still scratching my head and it is raining now grrrrrr!!!
 
You must log in or register to reply here.

Similar threads

S
Glow plug power
Replies
10
Views
1K
Singr07
S
Y
Another series III brake fail wiring harness question.
Replies
7
Views
636
steve2286w
steve2286w
S
1988 90 replacing lights with LEDs and have lots of questions
Replies
5
Views
852
sleepybear
S
T
Custom wiring: Why does my land rover not start?
Replies
5
Views
643
Tony Monsantoe
Tony Monsantoe
styleruk
2.25 petrol rough idle
2 3 4
Replies
60
Views
2K
styleruk
styleruk
Back
Top