Anyone breaking a P38 diesel

Rick-the-Pick · Feb 27, 2019

Anyone on here breaking a P38 diesel.

I'm in need of some looms.

Grrrrrr · Feb 27, 2019

Noooooooooo!

Musicmaker · Feb 27, 2019

I've thought about breaking my P38a. Depends how much it's going to cost to replace timing chain and other bits n bobs

Datatek · Feb 27, 2019

What exactly do you need Rick?

mozz smith · Feb 27, 2019

keith in his post QUOTE " im in need of some looms " !!!!!

mozz smith · Feb 27, 2019

Rick try Andy @ Avon breakers Bristol 01761479012 cheers rick hope this finds you well regards Mozz

DanClarke · Feb 27, 2019

I think both @Datatek and @wammers are "breaking" some P38 Doozles, but they have elected to do this over a vastly extended period of years and they keep "fixing" them.

Datatek · Feb 28, 2019

mozz smith said:
keith in his post QUOTE " im in need of some looms " !!!!!

I have lots of looms

would help to know which ones are required.

Rick-the-Pick · Mar 3, 2019

I'm in need of all the looms & connectors that plug into the becm.
I'm wearing my rigs out. Need to make a new rig.

Datatek · Mar 3, 2019

Rick-the-Pick said:
I'm in need of all the looms & connectors that plug into the becm.
I'm wearing my rigs out. Need to make a new rig.

Just short lengths or the entire looms? Cost a fortune to post if you want the entire looms, not to mention the time to remove.

Rick-the-Pick · Mar 6, 2019

Hi Keith,

I only need approx 18 inches or so, The longer the better as I like to stagger the joins.

Can you supply these Keith? It certainly would be appreciated.

I bought a set of fleabay a few years back, some were missing, some broken & some were from a petrol model requiring me to use jumpers wires.

Datatek · Mar 6, 2019

Rick-the-Pick said:
Hi Keith,

I only need approx 18 inches or so, The longer the better as I like to stagger the joins.

Can you supply these Keith? It certainly would be appreciated.

I bought a set of fleabay a few years back, some were missing, some broken & some were from a petrol model requiring me to use jumpers wires.

The scrapper is a diesel and has a Lo Line BECM, happy to look at cutting off the looms if that is any good to you, I expect postage from France will cost a bit though. Let me know if you want them and if it ever stops raining I will see what I can do.

Rick-the-Pick · Mar 6, 2019

Absolutely. Yes please, Keith.

Postage is ok from France. I send there all the time.

Whatever the cost is, it's covered.

Let me know what I owe you & I'll send you some cash.

Datatek · Mar 6, 2019

Rick-the-Pick said:
Absolutely. Yes please, Keith.

Postage is ok from France. I send there all the time.

Whatever the cost is, it's covered.

Let me know what I owe you & I'll send you some cash.

I'll get on it when the rain stops and PM you the postage cost. Postage is no problem it's just the weight will cost a bit. French post is ready for Brexit, the stamps for letters now say "The EU and Royaume Uni"

Wazzajnr · Mar 6, 2019

Check out parcels2go, I sent a box, 800x500x500 weighing 30kg. Took 4 days and including insurance cost just shy of 30 quid. I was amazed!

Datatek · Mar 7, 2019

Wazzajnr said:
Check out parcels2go, I sent a box, 800x500x500 weighing 30kg. Took 4 days and including insurance cost just shy of 30 quid. I was amazed!

I'm in Rural France.

Anyone breaking a P38 diesel

Rick-the-Pick

Active Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

Musicmaker

Active Member

Datatek

Well-Known Member

mozz smith

Well-Known Member

mozz smith

Well-Known Member

DanClarke

Well-Known Member

Datatek

Well-Known Member

Rick-the-Pick

Active Member

Datatek

Well-Known Member

Rick-the-Pick

Active Member

Datatek

Well-Known Member

Rick-the-Pick

Active Member

Datatek

Well-Known Member

Wazzajnr

Well-Known Member

Datatek

Well-Known Member

Similar threads