Arty1
Member
- Posts
- 31
- Location
- pittenweem Anstuther fife scotland
cheers buddy you have been a great help
Any help guys
- Thread starter Arty1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Madmustang
Well-Known Member
- Posts
- 1,646
- Location
- Castleford
Keep us updated :-0)
Arty1
Member
- Posts
- 31
- Location
- pittenweem Anstuther fife scotland
will do mate i plan to tackle it at the weekend
Madmustang
Well-Known Member
- Posts
- 1,646
- Location
- Castleford
I am not around this weekend so good luck
Madmustang
Well-Known Member
- Posts
- 1,646
- Location
- Castleford
Any news??
Arty1
Member
- Posts
- 31
- Location
- pittenweem Anstuther fife scotland
Im still working on the problems mate have been pouring a lot of comma diesel magic in it and that seems to be making it clear a bit quicker i have not done the check yet with the MAF sensor until i can see if i can find the radio code I have also had to take the props off due to one of the bearing mounts making a knocking noise when im turning so im not sure how to replace them yet .
Skinny Mike
Well-Known Member
- Posts
- 2,910
Unless I've read this post wrong (ignore me if I have)
You don't need to disconnect the battery to pull the MAF connector off. Don't clean the MAF with WD40, it'll make it worse. Use MAF cleaner.
You can also just pull the middle bit out of the MAF housing to clean it, saves taking the whole thing off.
If it smokes first thing in the morning, unplugging the MAF probably won't change it. It runs the default map at startup anyway. But try cleaning it.
I'm going to say you've got a leaky injector.
But that's just my opinion.
Cheers
Mike
You don't need to disconnect the battery to pull the MAF connector off. Don't clean the MAF with WD40, it'll make it worse. Use MAF cleaner.
You can also just pull the middle bit out of the MAF housing to clean it, saves taking the whole thing off.
If it smokes first thing in the morning, unplugging the MAF probably won't change it. It runs the default map at startup anyway. But try cleaning it.
I'm going to say you've got a leaky injector.
But that's just my opinion.
Cheers
Mike
Arty1
Member
- Posts
- 31
- Location
- pittenweem Anstuther fife scotland
cheers Mike
