Freelander 1 [ANSWERED] TD4 Clutch Master and Slave - Pattern Parts

xpuser8334 · Aug 18, 2015

Has anyone any experience of this eBay seller - or at least using pattern parts for the master and slave cylinder?
I need to buy loads of stuff, so want to use pattern parts to get me running for a few months at least.

Thanks,

http://www.ebay.co.uk/itm/LAND-ROVE...ASE-BEARING-/291033245442?hash=item43c2eee702

B34R · Aug 18, 2015

Don't do it. If you use a pattern clutch slave it'll explode 10 months down the line when you least need it and it's an absolute b*****d to get at.
It'll also probably take your clutch plate out as well.

By all means use a pattern master, as it can be swapped out relatively quickly, but the one bit you don't want to screw with is the slave, for the extra £ouch it's worth it.

xpuser8334 · Aug 18, 2015

point taken - thankyou..

dave21478 · Aug 18, 2015

I fitted a Borg and Beck slave cylinder and it is complete dogsh1t. A few others on this forum have had problems with them too.

xpuser8334 · Aug 18, 2015

I wouldn't have expected that of Borg and Beck (going back to the 1990's) - B&G used to be good quality stuff?
have they done what everyone else is doing, and started making parts out of Plasticine, Knicker Elastic and Playdoh????

xpuser8334 · Aug 18, 2015

OK... so... other than Landrover (I think LUK make them)
have people on here got an outstanding preference to Slave Cylinders on the Freebies???

Freelander 1 [ANSWERED] TD4 Clutch Master and Slave - Pattern Parts

xpuser8334

Active Member

B34R

Active Member

xpuser8334

Active Member

dave21478

Active Member

xpuser8334

Active Member

xpuser8334

Active Member

Similar threads