Another Electrical Problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
(Weird that SF said it was a 200tdi in two posts then!) I do have a 300tdi. You'll probably find an identical relay somewhere else in one of the fuseboxes, it would be easy enough to swop it temporarily rather than have to hunt one down somewhere. Even if the problem isn't the relay, you will have eliminated something else. But, knowing that you have more than one thing not working then eliminating the blower relay will only solve it unless the relay operates something else as well, which, without looking at the circuit diagram, I kinda doubt.
Have you downloaded RAVE yet, from
http://www.d-lander.com/manuals/ for instance.?
 
Pin 86, usually the odd one out as all the other pins line up in one direction.

Also, relay holders are pennies from motorfactors.

Relay pins are as so

87 = 12V+ feed to aux wiring
85 = earth
86 = trigger feed from switched feed
30 = 12V+ from battery

Simple 5 Pin Relay Wiring Diagram.jpg
 
Judging by the state of that wiring I would hazard a guess that the previous owner went in there on several occasions and hacked away to his/her hearts content.
...which was probably why he brought it to the forum's attention! But the OP may find some of the responders' information, suggestions and answers useful, I hope so anyway.
 
...which was probably why he brought it to the forum's attention! But the OP may find some of the responders' information, suggestions and answers useful, I hope so anyway.
Plus we KNOW OP's vehicle has been mucked about, as those gauges have been added and that may just be the start!
 
OK, just looked at OP's pic and it is definitely a Disco. With no airbag, so could even be a '98 although the switches we can just see make me think it is probably earlier...
 
...which was probably why he brought it to the forum's attention! But the OP may find some of the responders' information, suggestions and answers useful, I hope so anyway.

We all have a our 2p to add :)

Most of my 200Tdi wiring loom was burnt out by the PO and the welders incompetence lol I know all about the wiring of an old Discovery hahaha :)
 
In which of our beloved neighbouring countries did you pay that in Euros then? Presumably before you moved back to Hants.

Belgium, anything with a green oval on it is an insane price over there, bought it in 2012 (exchange rate was almost like for like) and spent almost 18 months working on it and fixing it up, turns out that this is round 2 lol
 
Back
Top