Angle grinder cutting discs

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Used to take the dogs out for their walk round the northern loop over the river valley , either that or through the park with the concrete cows.. They were well watered:)
 
Wots the bestest 9 inch angle grinder disc option to cut house bricks? 3mm cut width an option?
 
Paul D said:
My brother-in-law, Ken .. He's an ex-brickie and uses his trowel or a brick hammer ... ;)
Click to expand...
Problem is I want to cut a clean edge on a wall. So thought about cutting it with me angle grinder. Probably going to make a lot of dust so will water the floor first.
 
Yeah, sorry I don't know the answer. :D

Last time I used a stone disc in my angle grinder (4 1/2") was awful, made so much dust and crap I reckon I could have reconstituted another brick from the mess! If I did it again I'd have someone stood close by with either a watering can or hose and trickle water onto the cut and disc to minimise dust .. :)
 
Paul D said:
Yeah, sorry I don't know the answer. :D

Last time I used a stone disc in my angle grinder (4 1/2") was awful, made so much dust and crap I reckon I could have reconstituted another brick from the mess! If I did it again I'd have someone stood close by with either a watering can or hose and trickle water onto the cut and disc to minimise dust .. :)
Click to expand...
Thinking about this some more... I may follow the idea of choping the bricks but doing so while they're still part of the wall. Dun't need to be perfectly neat. I could always cement over the end if it ends up looking a mess.
 
For house bricks any diamond disc will do, I’ve just bought this beauty for doing some harder paving, better be worth it for £45!
76B37284-A332-4725-AB8C-F34BBFB48D59.jpeg
 
Thor1950 said:
Really, what the heck do you think they used before electricity?
Click to expand...

I dun't know as I weren't around when the pyramid's were built. Easy to chop bricks on their own. More difficult when some g*t has cemented them together.
 
Well this thread went on and on didn't it.. :)

Cheers all.. I got some cheap 1mm cutting discs and they are much easier to be accurate with and very fast.

Here's a picture of a grinding disc. Was 6mm, now about 3mm but looking threadbare. I haven't done much grinding until now. Is this the point I should stop using it or has it got some more? (Cutting discs I find I just stop using anyway because they wear down and lose their reach..)
 

Attachments

  • IMG_2111.JPG
    IMG_2111.JPG
    200.9 KB · Views: 145
I keep using them until they're not effective at grinding! Cutting discs break apart very easily, but 6mm discs tend to stay together a lot better, though I guess that also depends on whether you grind on the end or face, or both .. :)
 
You must log in or register to reply here.

Similar threads

Hammer'n'tongs
Tyres wearing unevenly:- Axle ends out of alignment
Replies
9
Views
1K
Hammer'n'tongs
Hammer'n'tongs
Hammer'n'tongs
Rebuild issues: disco axle on 90
2
Replies
27
Views
3K
Hammer'n'tongs
Hammer'n'tongs
MacGyver
For Sale Freelander 1 & 2 Mtec discs
Replies
0
Views
731
MacGyver
MacGyver
ned_
P38 transmission cooler relocation
2
Replies
20
Views
3K
ned_
ned_
Rougharse Racing
Another Salisbury Drum to Disc Question.
Replies
10
Views
2K
dag019
dag019
Back
Top