tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Yup,that ignition switch is still yours if you need it, did you check the wires and connector?
P38A And the sarga continues
- Thread starter pete12345
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 2,427
- Location
- Isle Sheppy
I’m going to try to do that today see I’ve I can find a extra wire or broken wire cheers Alan
- Posts
- 33,366
- Location
- North Shropshire
At least you have an easy to fit anti theft device that nobody would ever find!!
- Posts
- 2,427
- Location
- Isle Sheppy
True that I’ve stripped down the ignition no extra wires there I’ve anything one missing on a spade connector at the back of the ignition I’m trying to find a new connection block the black one that goes to the dashboard binical it’s starting now on and off but I know there’s still a loose or bad connection because the dashboard isn’t lighting up every time
- Posts
- 2,427
- Location
- Isle Sheppy
Seems to be ok now all I did was remove fuse box again tested earth on the purple connector 2 white wires and the 2 that go from the becm tested the wires on the ignition all good and tried to clean the connector that goes to the binnacle the only concern now is the temp gauge isn’t going up as far as the old one so could be doggy wire there
- Posts
- 12,601
- Location
- Sud ouest France !
- Posts
- 4,633
- Location
- Rotherham
Woof Woof
- Posts
- 2,427
- Location
- Isle Sheppy
That’s what the wiring looked like to me the untrained eye
Similar threads
