alarm/immobiliser problem.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

wheels

New Member
Posts
15
:confused: flashing red light for alarm not working.i have found that the lock on the off side rear door has become a little loose and all three screws are solid could this be the cause of the light not flashing. p s the light does come on every now and again which makes me think there is a loose connection.
 
wheels said:
:confused: flashing red light for alarm not working.i have found that the lock on the off side rear door has become a little loose and all three screws are solid could this be the cause of the light not flashing. p s the light does come on every now and again which makes me think there is a loose connection.
Yes this is possible all latches on doors must be made ,and full alarm is only with the fob[and not the key] try the old wd40 first might be a sticky latch, best oh luck, , ,:)
 
:) Thanks Ming, Have Tried Wd40 But No Joy. The Three Retainer Screws Seem To Be Solid, Maybe With Rust, Although The Lock Assembly Is Loose.could This Be Why It Works Now And Again Because Of A Bad Contact.????
 
wheels said:
:) Thanks Ming, Have Tried Wd40 But No Joy. The Three Retainer Screws Seem To Be Solid, Maybe With Rust, Although The Lock Assembly Is Loose.could This Be Why It Works Now And Again Because Of A Bad Contact.????
Wheels ma man ya gonna have to take the panel orft and do a visual. . .EY UP Mondo i see ya sculkin round Zippy was lookin for ya. . .
 
;) will do a vis hope you are right ming,you and your planet seem to have more knowledge than us mere earthlings.!!! MAY THE FORCE BE WITH YOU.
 
Back
Top