Disco 2 air suspension ?

griff2 · Jul 27, 2015

Hi all

Very quick question ,when i press the button on the dash how much should the back end raise?
and do i just press and release the button or hold it down for a while,and how do i then lower it again?

cheers
griff

johnlad · Jul 27, 2015

you hold the button until it bongs, then it should raise approx 40-5omm or 2" in old money

griff2 · Jul 27, 2015

cool thanks,and to lower????? press again?

johnlad · Jul 27, 2015

yeah press again or drive to fast(think its 15mph) and it lowers itself

griff2 · Jul 27, 2015

cool thanks mate

thebiglad · Jul 27, 2015

Bear in mind that for the suspension to pump up,you need to have the engine running and all doors and bonnet closed

Ricksailhog · Jul 27, 2015

Has to be in low ratio also

thebiglad · Jul 27, 2015

Ricksailhog said:
Has to be in low ratio also

No it doesn't. You can raise or lower the rear end in either high or low.

Landmark2 · Jul 28, 2015

+1. You're thinking of the Hill Decent

griff2 · Jul 28, 2015

I'm confused now lol so does it work in low and high or only low? thats the air suspension i mean not the hill decent

brian47 · Jul 28, 2015

Off-road rear suspension raise works in BOTH hi and lo ratios.
All doors must be closed and the engine running to make it work.
If the suspension is in the raised position before you start off, it will automatically revert to it's normal height when a speed of 18 mph is reached.
The air suspension can be lowered for loading or hitching if you either have a proper control fob (expensive) or have David Pye's modification incorporated. (Search the forum for further details)

The air suspension has nothing to do with the Hill Decent Control.

Disco 2 air suspension ?

griff2

Active Member

johnlad

Well-Known Member

griff2

Active Member

johnlad

Well-Known Member

griff2

Active Member

thebiglad

Well-Known Member

Ricksailhog

Member

thebiglad

Well-Known Member

Landmark2

Well-Known Member

griff2

Active Member

brian47

Well-Known Member

Similar threads