P38A Air Suspension Valve

Dopey · Oct 31, 2017

Anyone have a spare Valve? (and the screws) one of the bottom ones, missing one, turned the shed upside down and I cant for it, I just need the one please

Or if you have the block you don't need I will take that, and use for parts?
Thanks

Grrrrrr · Oct 31, 2017

Which valve are you talking about? I can have a look around if I know what I am looking for. I think Paul said there were some different sizes.

Dopey · Oct 31, 2017

It the 2 at the bottom, if you get me? not the top ones, if you take the cover off the valve is printed 4.0 I think, and not 2.0 thanks for look m8 appreciate it

kurtjohnson10 · Oct 31, 2017

I will have a look mate,should have one lying around

kurtjohnson10 · Oct 31, 2017

you mean the 2mm solenoid valve on the valve block. The ones next to the diaphragm block and prv.

Dopey · Oct 31, 2017

Yea but the ones that are marked 4 (4mm)

tomcat59alan · Oct 31, 2017

Dopey said:
It the 2 at the bottom, if you get me? not the top ones, if you take the cover off the valve is printed 4.0 I think, and not 2.0 thanks for look m8 appreciate it

You gone all foreign on us Dopey?speak English FFS.

kurtjohnson10 · Oct 31, 2017

Dopey said:
Yea but the ones that are marked 4 (4mm)

There should only be one 4mm solenoind on the valve block and thats the one thats on the very end of the valve block. The one that sits above the block that houses the nrvs.

kurtjohnson10 · Oct 31, 2017

I should have one somewhere mate, will have a look in the morning

Dopey · Oct 31, 2017

Thanks Kurt

Dopey · Oct 31, 2017

Im sure Pete said 4.0 marked on it

tomcat59alan · Oct 31, 2017

Dopey said:
Im sure Pete said 4.0 marked on it

Are you sure?

kurtjohnson10 · Oct 31, 2017

Dopey said:
Im sure Pete said 4.0 marked on it

No mate , the sequence is from the top left to right 1mm, 2mm, 2mm, 2.5mm, 4.0mm
On the bottom just two off 2.0mm solenoids

Dopey · Oct 31, 2017

Pete said twice as much air comes out of it, so its got to be 4,,, it was air coming out

Dopey · Oct 31, 2017

Kurt... let me look at the block in the morning........

kurtjohnson10 · Oct 31, 2017

OK mate,
but the 4mm does go on the end of the valve block, just putting one on the bottom of the valve block will just make one of the airsprings rise quicker than the other. I thought it may cause a leak path as well. not sure though. But a 4mm base has more to seal than a 2mm base. Only my opinion. I have never known any one else do this myself

I live and learn though lol

Dopey · Oct 31, 2017

OK its definitely the 4mm that I need and the screws

Dopey · Oct 31, 2017

I could be wrong about where it goes though lol

tomcat59alan · Oct 31, 2017

Th

Dopey said:
I could be wrong about where it goes though lol

I don't believe that.

Dopey · Oct 31, 2017

Yea I know...... lol

P38A Air Suspension Valve

Well-Known Member

Technician, Bodgit & Scarper Ltd

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads