Air locker wanted
- Thread starter Jamo36599
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Yes they are new. £570 with vat,
then you need to build it in a diff, set the back lash drill out for air lines. If you have the tools and know how to set up diffs buy from paddocks.
If not buy from crown diffs, steve is a top block built and supplied both my diffs
Second that, I have built my own but I have the tools and had practice,
Unless you are 110% sure you can build it right ten ge Steve to build it and ship it to you, give hike a call he's a very helpfull guy
Don't for get there's around £80 in bearings and oil seal, you will need markers blue or similar, might need a set of shims £20 ish from ascroft I think, you will need a puller to remove the old bearings from the pinion, a press to press the new ones in the diff case on to the pinion and the carrier bearings,you will me a good quality dti gauge to check the run out on the crown wheel and for setting the backlash, the appropriate tool for checking the preload, ideally a hight block to check the pinion hight. You will have to drill and tap the diff case and form the airline for the inside and flare it.
Oh and lots of cleaner to get rid of the oil as it gets every where.
Oh and lots of cleaner to get rid of the oil as it gets every where.
