marcus18
Member
- Posts
- 17
Hello
This has got me stuck
My P38 the air con works fine for about 5 mins then stops.
I have had it regased and vacked for leaks ans new oil and gas and all ok.
The blend motors seem to be doing what they should.
The air gap on the front of the pump seems ok hitting it didn't help.
I have put new pollen filters in and looked to see if all is clear.
I have disconected the overheat switch on the back of the pump just in case.
Still nothing , now i have run out of things to look for
It works fine and blows ice cold air for about 5 mins then you can her the compressor clutch disengage and that is it untill i stop and leave it for about an hour.
Anything you can do to help me would be very nice because i have a 300 mile each way drive at the end of the month
This has got me stuck
My P38 the air con works fine for about 5 mins then stops.
I have had it regased and vacked for leaks ans new oil and gas and all ok.
The blend motors seem to be doing what they should.
The air gap on the front of the pump seems ok hitting it didn't help.
I have put new pollen filters in and looked to see if all is clear.
I have disconected the overheat switch on the back of the pump just in case.
Still nothing , now i have run out of things to look for
It works fine and blows ice cold air for about 5 mins then you can her the compressor clutch disengage and that is it untill i stop and leave it for about an hour.
Anything you can do to help me would be very nice because i have a 300 mile each way drive at the end of the month