Agrover

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
There have been several write-ups in the Landy magazines over the years about these. They are quite rare. I recall seeing one or two with mid to late 80’s registration numbers.
 
Not many made, some series based in late 70's early 80's The idea was to have a truck to which a back hoe could be quickly attached. The rise of mini 360 diggers put an end to this.
Later some coil spring conversions were made with portal axles and 3 point linkage were made, again not many a dozen perhaps.
 
There have been several write-ups in the Landy magazines over the years about these. They are quite rare. I recall seeing one or two with mid to late 80’s registration numbers.
Was thinking about converting a Defender 90 to something similar
 
A good starting point would be to get hold of any magazine articles referring to the conversion and see if there are any groups on social media who can advise or know of someone with one who will let you take a look at it.

Good luck and let us know how you get on.
 
Not sure that was the right person

Hi all, i'm in the long process of rebuilding a 200tdi 110 Agrover conversion.
As you all know the cab is short of space and i was considering fitting an electric handbrake to give more leg room.
Does anyone have any experience of this and is there a decent electric module i can fit - i had a disco 3 for years which used to eat them, so i don't want to go down that path.
I did think about relocating the handbrake handle but that doesn't really work with my cab plans.
Any tips or ideas would be appreciated.
Jim

Was thinking of this post.
 
Back
Top