yep no specification as to beam pattern on a main beam headlight , as long as you can see where you are going at the speed you are travelling , its your neck !!
Aftermarket headlight laws ?
- Thread starter Dr_evil
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
yep no specification as to beam pattern on a main beam headlight , as long as you can see where you are going at the speed you are travelling , its your neck !!
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Sweet Hella micro lights for full beam it is then 
they're gonna be plenty bright enough specially with the 150w kc lights backing them up
they're gonna be plenty bright enough specially with the 150w kc lights backing them up
gemsdad
NOT BOTHERED.
- Posts
- 67,809
- Location
- halfway between here and there.
Sweet Hella micro lights for full beam it is then
doc,the way you are going with this build it will be bloody years before you get it on the road,if ever.i think you will get that ****ed of with farting about etc that you will either flog it or something and get something else to play with.
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
I've overcome the biggest hurdle and gotten it running, rest is all mods to come
headlights I'll install after MOT, gonna wire up the originals as its just plug and play for them with the connectors then I can faff about again.
Main thing left is the new gearbox mount, rest has been taken care of!
gemsdad
NOT BOTHERED.
- Posts
- 67,809
- Location
- halfway between here and there.
ok,but it has taken an age just to get it running hasn't it.in stead of doing all this fancy crap,why not just get it up to standard running mode.then when you have ironed all the niggles out of it etc and you have tried and tested everything,then you can upgrade/feck about with it.
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
ok,but it has taken an age just to get it running hasn't it.in stead of doing all this fancy crap,why not just get it up to standard running mode.then when you have ironed all the niggles out of it etc and you have tried and tested everything,then you can upgrade/feck about with it.
True, it has. But while I'm on a roll and all that
Fancy crap wise its more or less the only fancy bit I have to do other than the plumbing, the bulk of it now is just putting the bolts back in and a little welding here and there.
Even got some paint for it
:car:
gemsdad
NOT BOTHERED.
- Posts
- 67,809
- Location
- halfway between here and there.
True, it has. But while I'm on a roll and all that
Fancy crap wise its more or less the only fancy bit I have to do other than the plumbing, the bulk of it now is just putting the bolts back in and a little welding here and there.
Even got some paint for it
ok,but you have changed/altered that many bits on it you might find it does not run as well as hoped and needs more work doing to it etc.just get it running/looking as normal then go from there.as you have been advised before on other things,some of us have been down this path before.listen to what others who have done this type of thing are telling you,not just me but lots of bods.
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
I don't doubt it'll need continuous work as its a landrover and a labour of hatred and necessity
It'll come together eventually though and yes it may be a slight let down in the end until I get it running perfectly but again that'll come with time
it's not going to be sold or broken in the near future, I can say that much! Stuck with it as a non running piece of **** for too long to just let it go like that! Something will be made of this
gemsdad
NOT BOTHERED.
- Posts
- 67,809
- Location
- halfway between here and there.
I don't doubt it'll need continuous work as its a landrover and a labour of hatred and necessity
It'll come together eventually though and yes it may be a slight let down in the end until I get it running perfectly but again that'll come with time
Stuck with it as a non running piece of **** for too long to just let it go like that! Something will be made of this
ok,but what i am saying is take advice from bods who have been there and done that.
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
ok,but what i am saying is take advice from bods who have been there and done that.
Maybe when hell freezes over , he will
Jongould
New Member
- Posts
- 3,185
- Location
- Colchester
Everyone learns somehow, I have wasted plenty of time/money over the years on projects, its all a learning curve and part of the fun, its what gives the ol' boys the right to be moaning old gits
Spunka
New Member
- Posts
- 2,247
- Location
- Nr Wakefield
Everyone learns somehow, I have wasted plenty of time/money over the years on projects, its all a learning curve and part of the fun, its what gives the ol' boys the right to be moaning old gits
So im allowed to be a moaning old git, good
Can you tell the wife :crazy_driver:
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
I think you'll find I've already taken some advice
but well done for being a persistent troll. It really brings out the American in youThor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
Everyone learns somehow, I have wasted plenty of time/money over the years on projects, its all a learning curve and part of the fun, its what gives the ol' boys the right to be moaning old gits
+1 with that.
And a right I have justly earned, 7 kids from 39-10. And It is sweet satisfaction when they say in a few years later, Dad you were rightThor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
I think you'll find I've already taken some advice
Have that welder sold yet?
:bolt:
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
Yes actually
thought you would of said something by know? or did it go for less than you wanted?
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Pressbrakes taking it off me in a couple of weeks, not sorted out a final price but I know I'll lose a little on it.
Doesn't matter so much as I can do more or less all the jobs I need with stick, my other option if I feel I'm going to lose out on too much is to wire it in at 60A and only be able to use it at half power instead of 2/3rds
Tazz070299
New Member
- Posts
- 5,333
- Location
- Harrow
Sweet Hella micro lights for full beam it is then
But you won't be able to use the KCs lawfully on the road!
Similar threads
