Aftermarket A/C for Defender 90

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

natas

Well-Known Member
Posts
1,434
Location
Bahamas
Anyone know of an aftermarket A/C system that would work in a 90 300tdi truck cab?

Thanks.
 
Yup :D
ac_heat1.gif


UNIVERSAL AIR CONDITIONING & HEATER KIT


Yes, it will fit! This is the most compact, powerful and inexpensive combined Heat/AC package available - 400mm x 250mm x 120mm - the size of a large box of Cornflakes. 17,000 BTU. Straightforward installation with our detailed instructions.

Universal kit includes:

4 - outlet under-dash unit with double squirrel cage, three speed fan.

Remote fan speed and temperature control panel and wiring harness.

Chrome, swivel de-mist and face vents and hose ducting.

Polished aluminium desiccant drier with integral Hi-Lo pressure safety switch & mtg. bkts.

Complete set of hose unions, 'o' rings and service ports.

Heater water valve and control cable.

Full instructions and fitting kit.

You will require a compressor, engine mounting bracket and a condensing radiator.
 
Last edited:
I havent tried that one as my 90 luckily came equipped with an A/C unit on both doors. Its very simple to use...heres the instructions. Feel free to print them off.









Near-side:

wind down


wind up


Off-Side.

wind down


wind up
 
98F 100% humidity stuck in traffic behind a dump truck belching sulfur fumes.

I need AC mon, fuk the windows...........
 
Yup :D
ac_heat1.gif


UNIVERSAL AIR CONDITIONING & HEATER KIT


Yes, it will fit! This is the most compact, powerful and inexpensive combined Heat/AC package available - 400mm x 250mm x 120mm - the size of a large box of Cornflakes. 17,000 BTU. Straightforward installation with our detailed instructions.

Universal kit includes:

4 - outlet under-dash unit with double squirrel cage, three speed fan.

Remote fan speed and temperature control panel and wiring harness.

Chrome, swivel de-mist and face vents and hose ducting.

Polished aluminium desiccant drier with integral Hi-Lo pressure safety switch & mtg. bkts.

Complete set of hose unions, 'o' rings and service ports.

Heater water valve and control cable.

Full instructions and fitting kit.

You will require a compressor, engine mounting bracket and a condensing radiator.

I called these guys up and asked if they can supply the compressor bracket, now I see they dont.
So how do I know what compressor to buy let alone match it to a bracket that will fit on the 300tdi, and what about the belt/pulley AND condensing radiator.
I am a retard:confused: I know but any info would be very helpful.

Thanks.
 
So,

Im wondering, if I get the universal AC system from carbuilders solutions.
The system does not include a compressor or a condensing radiator, however they do supply them but you have to make your own brackets and figure out how to mount the radiator.
My question is, would the stock compressor and condensing radiator from Land Rover work with this system and if so wheres the best place to purchase them?

Thanks.
 
depends on what size outlets they have and whether it matches your kit.

culd get them from a mainstealer, or ask somewhere like paddocks if they can get hold of them?
 
Back
Top