Advice please.

MiniLloyd · Jul 12, 2016

Hi all,

Just had a 06 plate Freelander MOTed and since I got it back it is now very juddery at idle. So will sometimes cut out when I start it up but will normally start straight away afterwards. Any idea what will cause this before I send it back to garage

Sorry don't really no anything about engines, as much as I wish I did.

Cheers

stew laws · Jul 12, 2016

Petrol ..diesel
As judder in the the engine ..wheels ..body ..mileage ... etc etc ..crystal balls are currently on hold at Southampton docks )))

MiniLloyd · Jul 12, 2016

Point taken.

Diesel. Whole body shake. 93-94k. Idle at just below 1000 and will shake like mad. Bring clutch to bite and settles likewise if in neutral and apply accel. gently it's fine.

stew laws · Jul 12, 2016

If I remember someone did have an issue on an mot station on the brake calibration that messed up something... that was around a month to 6 weeks ago on here.. for some reason it's jogging my memory but not sure of the reason..

Just flicked back there is a few threads on the procedure and potential issues .. have a scout back to 14 June I think the thread is 2 wheel brake test ..

SpringDon · Jul 12, 2016

Do you think it's possibly not running on all cylinders until you rev it a bit? A person told me this happened to him (non landrover) and blamed the fact that they revved the nuts off it for the mot.

stew laws · Jul 12, 2016

Yes but when he engaged the clutch its smoothing out discounting a cyl down

MiniLloyd · Jul 12, 2016

Cheers I'll take a look for the thread and have a read up on it.

Advice please.

MiniLloyd

Member

stew laws

Well-Known Member

MiniLloyd

Member

stew laws

Well-Known Member

SpringDon

Well-Known Member

stew laws

Well-Known Member

MiniLloyd

Member

Similar threads