Advice needed, help

Hi,

Just want your advice. I stripped off some of the cash damage to my Disco, and it looks like I need most of an inner wing, wheel arch, battery compartment and also headlamp units.

Just wonderer what's the best was to go about this a) buy small panels and fix or b) but one of the complete easy on kits?

Also, anyone know a good welder near Cowfold, West Sussex who could help me out?

Lastly the panel holding the radiator and inter-cooler is bent backwards, thankfully they are in good nick and did not touch the engine. Does anyone know where I could get a replacement panel?

Thanks in advance.

Try FROGGATTS they do a good range of repair panels for discos you could try them..

YRM make most replacement panels for Disco's, or have a chat with Daft. He makes a mean repair panel....

I do?
thanks .

get the complete inner wing and headlight assembly from YRM, comes in zintek.

Land Rover Discovery/Range Rover Classic Inner Wing Repair Panels (Parts A-G inc.) n/s - YRM Metal Solutions
Land Rover Discovery 1 Headlight Unit n/s - YRM Metal Solutions

Are range rover classic inner wings the same as disco inner wings? If so I've got one in the garage I could sell . Its got a couple of patches welded on and has been primered. Will grab a pic for you if they are the same.

I used YTM for replacement rear chassis mounts good to deal with

The Mad Hat Man said:

I do?
thanks .

get the complete inner wing and headlight assembly from YRM, comes in zintek.

Land Rover Discovery/Range Rover Classic Inner Wing Repair Panels (Parts A-G inc.) n/s - YRM Metal Solutions
Land Rover Discovery 1 Headlight Unit n/s - YRM Metal Solutions

Click to expand...

Thanks all, and these links look cool, what about the very top panel (wing top rail) where the snorkel used to go through, do I need to get a genuine land rover one?

If it was me i would straighten out the inner wing thats on it.
Sould be easy enough or find a local bodyshop and get it pulled out.
Then just get the headlight panel.
Then just repair as needed with sheet steel.