minesthechevy
Member
- Posts
- 41
Has anyone herein ever taken out their D1 ashtray and/or coin slot and fitted ARB/Carling style switches in their place?
Disco 1 Adding ARB/Carling switches
- Thread starter minesthechevy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
minesthechevy
Member
- Posts
- 41
Sorry - should have searched the forum first. Will look through the archives.
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
can be done......... needs a bit of dremmeling though.
pete1987RRC
Well-Known Member
- Posts
- 5,136
- Location
- East Midlands
Dremmeling....
To dick about with a little grinder which was a pressie or an impulse buy for a silly length or time when a file would of done it in 20 seconds.
I call mine a die grinder
To dick about with a little grinder which was a pressie or an impulse buy for a silly length or time when a file would of done it in 20 seconds.
I call mine a die grinder
pete1987RRC
Well-Known Member
- Posts
- 5,136
- Location
- East Midlands
Dream Mellons
Spell checker says this is correct when I refer to the smal grinder machine, at last it is right!
Spell checker says this is correct when I refer to the smal grinder machine, at last it is right!
I had one of these 3d printed to fit in place of the coin tray.
It's made for carling switches.
http://www.thingiverse.com/thing:1008821
https://www.3dhubs.com/
Foz
It's made for carling switches.
http://www.thingiverse.com/thing:1008821
https://www.3dhubs.com/
Foz
Last edited:
minesthechevy
Member
- Posts
- 41
That's neat - I guess your D1 is LHD from the pictures....I had one of these 3d printed to fit in place of the coin tray.
It's made for carling switches.
http://www.thingiverse.com/thing:1008821
https://www.3dhubs.com/
Foz
Hi mate - not my pictures. They are just the pictures the guy took that created the 3d model
Mines a RHD
you can download that model and use the 3dhubs website to find someone local to you to print and ship the part to you.
I think it cost me about a tenner.
Can just about see mine in this photo, it only has 1 switch in it.
Foz
I designed a bunch of panel replacements for this. They are here. http://www.shapeways.com/shops/fhsolutions
I put the coin holder on on thingiverse.
I put the coin holder on on thingiverse.
noiseboymart
Active Member
- Posts
- 249
- Location
- Bridlington
Hijacking a bit here but has anyone found anywhere in the UK that does the carling switch with a fan on it.Plenty in Australia but havnt found any in UK yet .
