any advice on the size,difficulty and cost of replacing the ace pipes on a disco 2 03 plate as ive discovered 1 is leaking before it goes into the valve block near the front of the car? Looks quite difficult going by a quick search on the internet.
ace corroded pipe replacement help
- Thread starter eddiecos
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
3 of the 4 pipes from front of block are high pressure 1 low which can be repaired with hose clips and hose for a while,the other 3 will need replacing pipes are about £100 each ,new pipes from pump come in 2 pieces to aid fitting
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
have a good look at rear pipes where they go over chassis to ram often rusty there ,if your going to disturb block may as well replace all that are not in very good condition
Last edited:
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
ive removed quite a few ace systems and fitted roll bars ,seem to handle well enough,most say they cant tell any difference
thanks for the advice
