ABS, TC and Hill Descent Lights all stay on
- Thread starter fetler
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,296
- Location
- Embasinga stocæ
try a :search: for "three amigos"
50 pence
New Member
- Posts
- 1,471
- Location
- Cambridgeshire
If you do some " searching " you,ll be reading all night !
All the information you could want is behind that "search".
Its a very common question.
Del.
All the information you could want is behind that "search".
Its a very common question.
Del.
foss
New Member
- Posts
- 1,734
- Location
- The muddiest driveway in Essex
where do you live...i know a man near me who re-wires the modulator as its normally a worn wire inside the unit itself.
half hour job
half hour job
Used to live in Halifax long time ago.
Goin down on Sunday to visit relatives, cant do the rewire tho
foss
New Member
- Posts
- 1,734
- Location
- The muddiest driveway in Essex
dunno fella...i think its something he came up with himself after many hours "fiddling" about with them...Im not sure how official a fix it is if you like, but he's done it on quite a few including mine & its been all good for about a long while now. To be honest, its probably diy'able...if i get chance ill take a pic of what he did if itll help anyone else.
Rick-the-Pick
Active Member
- Posts
- 782
- Location
- Hove, Sussex.
I've always reset the three amigo's & noi one has ever come back because they've came on again.
Get the reset first & see if they reappear before you start digging around.
They have to be reset in a specific order.
Get the reset first & see if they reappear before you start digging around.
They have to be reset in a specific order.
Last edited:
foss
New Member
- Posts
- 1,734
- Location
- The muddiest driveway in Essex
how manys that? 2?!
martinhollings
New Member
- Posts
- 659
- Location
- newark/nottingham
try this ABS Mod - Land Rover Club V.I.
foss
New Member
- Posts
- 1,734
- Location
- The muddiest driveway in Essex
well found that man...thats what i had done, Option B
Last edited:
- Posts
- 3,275
- Location
- Rushden, Northants, UK
There is a shuttle valve switch kit, about £35 or so, can be replaced with the hydraulics untouched, biit of a fiddle though.
The PCB connector resolder is a more complex job and needs a bit of care. Still do-able though, we did ours last December. Bought a spare Modulator assy on Fleabay, then modded that one and fitted it.
The Virgin Islands LR site is the best one for the mod, Josh did a good write-up.
The re-soldering takes a bit more time and you have to split the modulator, but still no hydraulics are disturbed.
Peter
The PCB connector resolder is a more complex job and needs a bit of care. Still do-able though, we did ours last December. Bought a spare Modulator assy on Fleabay, then modded that one and fitted it.
The Virgin Islands LR site is the best one for the mod, Josh did a good write-up.
The re-soldering takes a bit more time and you have to split the modulator, but still no hydraulics are disturbed.
Peter
