P38A Abs light tc light

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Thanks bix I’ve got to test all the sensors yet I’ve been at work all wkend so no chance till probably Monday but they seem to reading all over the place I’m waiting for a new charger for my laptop to get the newest update on nanocom the bloody enemy tidied up and can’t find the charger
 
pete12345 said:
Thanks bix I’ve got to test all the sensors yet I’ve been at work all wkend so no chance till probably Monday but they seem to reading all over the place I’m waiting for a new charger for my laptop to get the newest update on nanocom the bloody enemy tidied up and can’t find the charger
Click to expand...
You can test them all from inside the car. Just need to check resistance across the respective pins on the abs ecu plug.

20220815_072728.jpg
 
Thanks I’m going to check them at the wheels first getting the enemy to spin the wheels will be the difficult part where is that ecu located up under the glove box or in the engine bay
 
Just updated the nanocom and did the wheel sensors test road speed seems all different but on faults it says rear right 06-08 faults 6 times
 
Will try fit wheels back on tomorrow then get it out of garden because not lot of room to get to abs ecu 3 new sensors and still problems
 
Just a thought would running up with the wheels off the ground not give you odd readings as there may be a bit more drag on one wheel there for altering the wheel speed .
 
See post #16 in this thread. As far as I know, they still haven't fixed the bug, so if Nanocom says Rear Right, it might be be the left one that's faulty.

When I get a chance will check to see if mine give readings when spinning wheels.
 
Well I downloaded the latest version on nanocom changed the 2 rear sensors she back on terra firma now so could give her run round block and get the readings again I only have to go about 10 mph don’t I and now out of front garden so I can access ucu better
 
Did a run round the block rears seem to be reading same speed front left reading front right a new one not reading anything but says on nanocom 2.31 volts to all of them will try get live data on SD card and try post readings on hear for more advise from the knowledgeable folks on hear
 
Well no joy there the SD card did record but only a load of tax telling me all the functions on the Wabco test page but no live data lost again will have to have a read up
 
You must log in or register to reply here.

Similar threads

p38DH
P38A Diagnostic device
Replies
8
Views
1K
p38DH
p38DH
V
2 amigos ABS and TC light L314 freelander 1 (not solved) (new)
Replies
10
Views
1K
Veslav
V
Henry.adams
Traction control problems
Replies
9
Views
646
Henry.adams
Henry.adams
02Disco2
Disco 2 Abs & TC lights but no fault codes
Replies
1
Views
240
sierrafery
sierrafery
kricktd5
L332 abs/ HDC
Replies
1
Views
848
Datatek
Datatek
Back
Top