Hi, Just as the disco comes to a stop (1-2 mph) the abs pump starts (vibration on pedal) I suspect a sensor or sensor plug. the disco is on tarmac and moving in a straight forward direction. I thought the abs was inhibited from activating under a certain speed. so could it be something else. Thanks
Disco 2 abs kicking in at a very low speed
- Thread starter ES4
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
sierrafery
Well-Known Member
- Posts
- 17,871
- Location
- Arad/Romania
Hi, it can be ABS or EBD misbehaviour due to a signal missbalance, make sure that the tyre pressures are even per axle and as close as possible to the factory recommended ones cos the system was calibrated to work 100% within those parameters including tyre dimensions. It happens also when different brand sensors are mixed. It's not a faulty one cos if it was you should have got the 3 amigos.
Another issue can be if the calipers are not braking the wheels with the same power so one will stop faster than the other
Another issue can be if the calipers are not braking the wheels with the same power so one will stop faster than the other
Hi, Sierrafery, I suspect the latter (Brake in balance) as nothing has been changed in the last 2 years, this fault has just started today. Brake discs and pads were done 2 years ago but we do a very low milage and they look fine, but could probably do with a quick clean-up slides etc. could be a sticky piston as we have that before as well.
Here's a link about false abs activation which usually happens at low speed.
