P38A A series of faults

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Slooby said:
:mad:

Took the P38 for a quick test drive and the pump is now leaking from somewhere else, with drips coming from around the the distributor housing where it bolts to the main body...
Click to expand...

Yeah, my experience of these pumps is that when they start leaking they really need a full refurb so just bite the bullet and exchange for a refurbed one from Diesel Jones.
 
Ok, so what tools do I need to procure to remove the pump?

Seen these on ebay:

https://www.ebay.co.uk/itm/17523223...YMS6zhHQWu&var=&widget_ver=artemis&media=COPY

Pondering whether it's worth putting a new timing chain set in while I am at it too (it is after all a 26 year old, 215k mile engine) so wondering if this tool kit has all the bits and of good enough for the job, or is complete tat only fit for scrap:

https://www.ebay.co.uk/itm/17532200...YMS6zhHQWu&var=&widget_ver=artemis&media=COPY
 
Slooby said:
Ok, so what tools do I need to procure to remove the pump?

Seen these on ebay:

https://www.ebay.co.uk/itm/17523223...YMS6zhHQWu&var=&widget_ver=artemis&media=COPY

Pondering whether it's worth putting a new timing chain set in while I am at it too (it is after all a 26 year old, 215k mile engine) so wondering if this tool kit has all the bits and of good enough for the job, or is complete tat only fit for scrap:

https://www.ebay.co.uk/itm/17532200...YMS6zhHQWu&var=&widget_ver=artemis&media=COPY
Click to expand...

That second kit looks OK. More than I have in mine. You'll need a dial guage and adapter for the pump timing. RAVE also says the cam should be set with an 18 thou plate under the cam holding tool on engines over a certain mileage so probably worth doing that although you will need a new camshaft bolt. Done up to a certain torque and then an extra 35 degrees on top.
 
Ah, now, I may have that adapter for the dial gauge as we turned one up to go on a Bosch VE pump, as my VW T25 1.6 JX TD uses one, as does the 200/300Tdi too... I also have a digital Mitutoyo gauge that by no means was scavenged from something about to be launched into a skip that I was filling...
 
You must log in or register to reply here.

Similar threads

K
Is my RR Classic in EAS shutdown?
Replies
12
Views
854
kevleaper
K
O
03 L322 EAS ECU Can bus fault / ABS temp system deactivation
Replies
1
Views
589
oldradiotech
O
Montyjohn
P38A Adding a valve to manually fill EAS tank and why did my pump fail again?
Replies
14
Views
937
Datatek
Datatek
Montyjohn
P38A A couple of queries about rebuild EAS valve block
Replies
9
Views
680
Grrrrrr
Grrrrrr
G
RR 55 plate l322 vogue
2
Replies
30
Views
1K
stuu
stuu
Back
Top