David Moss
New Member
- Posts
- 6
- Location
- UK
any suggestions of what would make a good replacement for my series bottle jack please?
A replacement bottle jack?
- Thread starter David Moss
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Remora107
Well-Known Member
- Posts
- 6,833
- Location
- South Shropshire
Another Series bottle jack ?!
Welcome to the forum , I am guessing you haven’t introduced yourself . Do not be surprised if you get a bit of flak from some the less polite members here . They are usually only allowed access to their computers between medication and are often not supervised .
Welcome to the forum , I am guessing you haven’t introduced yourself . Do not be surprised if you get a bit of flak from some the less polite members here . They are usually only allowed access to their computers between medication and are often not supervised .
discool
Well-Known Member
- Posts
- 13,609
W
Do the same as u would do before Forum’s... get a similar item Simples... or carry a trolley jack.
David Moss
New Member
- Posts
- 6
- Location
- UK
Thanks, owner of a Series 3, diesel 88. Interesting website.
Remora107
Well-Known Member
- Posts
- 6,833
- Location
- South Shropshire
Well no one is perfect !
steve2286w
Well-Known Member
- Posts
- 4,523
- Location
- monkeyangerland
The discovery bottle jacks are very good I have 2 for my my series 3 88 , good lift on them and extension handle have a look on eBay
Oh and Welcome to LZ
Oh and Welcome to LZ
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
The original series Jack was a screw affair. I bought a cheap 3 ton bottle jack off eBay for carrying around in me landy. The problem is that I can't be arsed carrying a spare wheel so the Jack is academic.
Col
Col
rob1miles
Well-Known Member
- Posts
- 3,565
- Location
- Slough and Bath
After getting a puncture in a field I discovered that you need about 15" of lift to change a wheel on a series. My bottle jack took 3 lifts with blocks cobbled from stuff i could find. Came home and bougth a Disco double hight jack off e-bay. Its small and has a cradle end to sit on the axles. One like this:
https://www.ebay.co.uk/itm/Land-rov...168957?hash=item215c39223d:g:o7AAAOSw4llc9jya
BUT! Make sure you get the handles as these seem to sell for as much as the jacks!
https://www.ebay.co.uk/itm/Land-rov...168957?hash=item215c39223d:g:o7AAAOSw4llc9jya
BUT! Make sure you get the handles as these seem to sell for as much as the jacks!
Interceptorxj
Well-Known Member
- Posts
- 1,718
- Location
- Bolton, Greater Manchester.
Yes , top up using an oil can through the rubber bung orifice half way up the jack.
Last edited:
David Moss
New Member
- Posts
- 6
- Location
- UK
Many thanks, I will have a look. Thanks for the warm welcome.
David Moss
New Member
- Posts
- 6
- Location
- UK
Many thanks, good to know on both accounts.
Extreedoc
Well-Known Member
- Posts
- 505
- Location
- Leicestershire
I have a Disco one as well, found it in a scrapper. No handle could I find though but I made one with a bit of pipe. Never had to use it so it's good to know that it works on a series. Find yourself a nice bit of thick ply to stand it on ready for soft ground.
David Moss
New Member
- Posts
- 6
- Location
- UK
Many thanks for the advice, really appreciated. I have ordered an old Disco one, with handle from eBay.
