Lief Zpring
Well-Known Member
- Posts
- 802
- Location
- Northumberland
The indicators developed a little quirk last week, the green trailer light on the instrument panel illuminated permanently but the indicators still functioned. So I put it down to moisture in the wrong place and forgot about it.
Left home at six this morning after scraping ice from the windscreen (both outside and inside). The Landy started fine and the lights all worked but I noticed the trailer light had gone out and the indicators were dead. The fuse was fine, I wiggled the back of the column switches, the relay but still no indicators. Surprisingly, on a 25 mile journey from rural Northumberland into Newcastle City Centre I only really need to indicate once. So I chanced it.
When I arrived at work I switched the ignition off and removed the key. Normally at this point the engine falls silent. Not today. The engine carried on idling quite happily. I stared at the keys and listened to the 300tdi purring away (well not really purring, more clattering). While I tried to remember the best way to kill a tdi, I noticed that the headlights were still on. I turned them off and the light switch also killed the engine. How are these things wired up?
Anyway, before leaving at 3.00 pm, after a productive day at the office I test the indicators. Dead . About five miles into the journey they suddenly spring back to life and become fully operational without even the trailer light.
Back home the engine stops on the turn of the key. No drama.
Does anyone else's Defender develop electrical faults and then fixes them in the same journey? I think the column switch may be the cause of the indicator fault but I have no idea how the light switch can stop the engine.
Left home at six this morning after scraping ice from the windscreen (both outside and inside). The Landy started fine and the lights all worked but I noticed the trailer light had gone out and the indicators were dead. The fuse was fine, I wiggled the back of the column switches, the relay but still no indicators. Surprisingly, on a 25 mile journey from rural Northumberland into Newcastle City Centre I only really need to indicate once. So I chanced it.
When I arrived at work I switched the ignition off and removed the key. Normally at this point the engine falls silent. Not today. The engine carried on idling quite happily. I stared at the keys and listened to the 300tdi purring away (well not really purring, more clattering). While I tried to remember the best way to kill a tdi, I noticed that the headlights were still on. I turned them off and the light switch also killed the engine. How are these things wired up?
Anyway, before leaving at 3.00 pm, after a productive day at the office I test the indicators. Dead . About five miles into the journey they suddenly spring back to life and become fully operational without even the trailer light.
Back home the engine stops on the turn of the key. No drama.
Does anyone else's Defender develop electrical faults and then fixes them in the same journey? I think the column switch may be the cause of the indicator fault but I have no idea how the light switch can stop the engine.