A couple of bits I can’t remember…

congo181 · Apr 14, 2022

Morning all.
Couple of problem areas in my restoration that I didn’t take photos of.

Can someone tell me where the front wing stays on a 110 pickup bolt to on the chassis? The ones just forward of the rear wheel, at the front of the tub.

Second, there’s a metal P-clip on the transmission brake cable and I can’t work out where to bolt it to.

Many many thanks if anyone can share the answers to these.
Cheers all. Jim.

Al2O3 · Apr 14, 2022

congo181 said:
Morning all.
Couple of problem areas in my restoration that I didn’t take photos of.

Can someone tell me where the front wing stays on a 110 pickup bolt to on the chassis? The ones just forward of the rear wheel, at the front of the tub.

Second, there’s a metal P-clip on the transmission brake cable and I can’t work out where to bolt it to.

Many many thanks if anyone can share the answers to these.
Cheers all. Jim.

Do you mean the rear wing stay?

congo181 · Apr 15, 2022

Al2O3 said:
Do you mean the rear wing stay?

I’ve got two stays on each side. I suppose they are both on the rear wing, yes

The rear-most ones are fitted ok, as I found the hole in the tub but the front ones (located just in front of the rear arch) I have no idea if where they bolt to. There just doesn’t seem to be a bolt in reach.
I’m pretty sure they’re in the correct place on the sill as I have a photo of them still on the tub.

You can also see that they’re the opposite way up from the ones at the back which is odd.
Blooming things.

GRATCH · Apr 15, 2022

Is there a bracket on the chassis that they bolt to?

congo181 · Apr 15, 2022

GRATCH said:
Is there a bracket on the chassis that they bolt to?

Not that I can identify. It’s a mystery (as Toyah would say).

David Leech · Apr 15, 2022

What chassis, 200, 300 etc.?.....

David Leech · Apr 15, 2022

Mine is Td5 hardtop. The stays are fitted to the rear hole of the marked bracket on the chassis.....

congo181 · Apr 15, 2022

It’s a very early 1986 110 David. So pre defender.
It’s got the 12J in it.
The diagram is really useful. I’ll see if I have those brackets. Many thanks sir.

slomofo · Apr 15, 2022

congo181 said:
Not that I can identify. It’s a mystery (as Toyah would say).

….mythtery surely

Al2O3 · Apr 16, 2022

This is my 1996 Defender 90 bolts to the chassis

Al2O3 · Apr 16, 2022

Evening mate. My wing supports are a different shape to yours, presumably linked to the difference between the 90 and 110. Anyway, I was thinking after looking at your picture, if the two in question are loose, they must have been bolted to the chassis. The other two are still bolted to the floor. If the two in question were originally bolted to the floor, why are they loose? There's nothing else for them to fix to, other than the chassis.

A couple of bits I can’t remember…

congo181

Well-Known Member

Al2O3

Well-Known Member

congo181

Well-Known Member

GRATCH

HUGE MEMBER

congo181

Well-Known Member

David Leech

Well-Known Member

David Leech

Well-Known Member

congo181

Well-Known Member

slomofo

Well-Known Member

Al2O3

Well-Known Member

Al2O3

Well-Known Member

Similar threads