'92 Rover - help with driver's seat adjusting

Our driver's seat cannot be adjusted forward/backward electrically - can this function be performed manually? Any advice is much appreciated.

This I do know as I have just done it to my classic.

First remove the cover from the 4 electric motors under the seat. the motor that controls the forward/ back movement is the top one at the front. then undo 1 screw from each side of the motor so that it can swivel forwards. By doing this you can release the 2worm drives without having to unscrew the ends. Then get 2 drills, make sure you can control their speed. Attach 1 to each drive cable but make sure that one is in reverse as the seat will not move evenly. then it is trail and eror as to which 1 is forward or reverse but the seat will slide.
If the seat is high enough to get your hand under you can unplug the motor connection block and hot wire it but let me know if this is any help.

Thanks Charles - will give that a try.

It's usually just dirty swirch contacts. Carefully take the switch appart and clean the contacts,

I have a problem with mine where the switch does the mirrors and the mirror switch doesn't work anyone have any ideas? 93 LSE

I have been told the ecu under the seat controls both as LR thought if you move the seat then you would adjust your mirrors. So if the ecu plays up then it can lead to the seat switch moving the mirrors. Do not take that as gospel but if true sounds like an ecu problem.