91 classic break problems

Hello, I was wondering if someone could tell me how to seperate the rear disc from the hub assembly. Thanks in advance...Tacoma

Hi, It's not an easy task if the bolts are rusted, but you'll find when you remove the hub and brake disc assembley that there are 4 or 5 small nuts and bolts holding the disc to the hub. Mine were covered in muck and not visible until I cleaned it. It may be worthwhile soaking the nuts in releasing oil first as they're quite small and easy to snap. You'll need a block of wood and a hammer to tap the assembly apart after the bolts are removed as it's a tight interference fit.

Hope this helps you.

Thankyou

P38Al said:

Hi, You'll need a block of wood and a hammer to tap the assembly apart .

Click to expand...

i would just like to comment that i have never heard the words hammer and tap in the same sentence before