DBC
New Member
- Posts
- 5
- Location
- Cheltenham
I have almost completed a complete rebuild of a 1986 90 3.5 V8. I have replaced all the body with either new or newish secondhand parts but I am having problems with the front doors.
They are the secondhand new style doors with door cards but they don't fit flush with the bodywork.
The hinge side of the doors seams to fit flush with the front wings but the edge of the doors on on the lock side protrudes about half an inch from the rear side panels. It looks like the door cards are in contact with the seat box so the lower section of the doors protrude.
I have removed the new door seals but the problem still exists.
Does anyone know if the depth of the door cards have changed over the years which might explain why they are in contact with the seat box.
Any advice would be gratefully received. David
They are the secondhand new style doors with door cards but they don't fit flush with the bodywork.
The hinge side of the doors seams to fit flush with the front wings but the edge of the doors on on the lock side protrudes about half an inch from the rear side panels. It looks like the door cards are in contact with the seat box so the lower section of the doors protrude.
I have removed the new door seals but the problem still exists.
Does anyone know if the depth of the door cards have changed over the years which might explain why they are in contact with the seat box.
Any advice would be gratefully received. David
