captainbeaky
Active Member
- Posts
- 292
Probably mentioned here before, but I could do with a really simple and quick answer. I've not done much work on the 90/110's - so I am unsure about bulkhead replacement.
Quite a few of the 90's I'm looking at have bulkhead/door pillar/windscreen corner issues.
If I need to change a bulkhead on a 90, will any other 90 bulkhead fit?
(I've noted that a TD5 bulkhead can be had for under £200) - are they all the same?
Is it a simple change over job, or are there complications?
From inspection, it looks like a relatively simple (albeit extensive) job of unbolting and changing (but with lots of bits to take off and replace....).
Ditto the windscreen, are all 90 windscreen surrounds the same/similar (apart from the later ones without the vents)
Cheers,
Mike.
Quite a few of the 90's I'm looking at have bulkhead/door pillar/windscreen corner issues.
If I need to change a bulkhead on a 90, will any other 90 bulkhead fit?
(I've noted that a TD5 bulkhead can be had for under £200) - are they all the same?
Is it a simple change over job, or are there complications?
From inspection, it looks like a relatively simple (albeit extensive) job of unbolting and changing (but with lots of bits to take off and replace....).
Ditto the windscreen, are all 90 windscreen surrounds the same/similar (apart from the later ones without the vents)
Cheers,
Mike.
