90/110 winch bumper

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Thor1950 said:
you don't want that. Chip the powder coat and water get under it and soon big sheets of powder coat peels off. Paint easier to keep looking nice and any chips, nicks in the paint work can be easily fixed
Click to expand...

Good Point , POR15 paint me thinks is the way forward
 
I work all around south fylde and into Blackpool, do you do them collected? Would be looking at one around the end of the month. Just bought my first 90 and I'm skint till then :D
 
Stu,

We need a chat about marketing and web presence these pictures don't do your stuff justice :D (By the way the offer of a proper web site with online ordering in exchange for a rear bumper is still on :))

You really do need some decent pictures which show your metalwork off in it's full glory......

I'll send you pictures of the metalwork on my Landrover shortly. The rear light bar is all wired up on the table but I need to fit new tube outriggers before the tree sliders can go on. The rear light covers are on and the front ones will go on when it stops raining!
 
cowasaki said:
Stu,

We need a chat about marketing and web presence these pictures don't do your stuff justice :D (By the way the offer of a proper web site with online ordering in exchange for a rear bumper is still on :))

You really do need some decent pictures which show your metalwork off in it's full glory......

I'll send you pictures of the metalwork on my Landrover shortly. The rear light bar is all wired up on the table but I need to fit new tube outriggers before the tree sliders can go on. The rear light covers are on and the front ones will go on when it stops raining!
Click to expand...

Thanks darren, yes a good website is needed and will take you up on your offer.
Look forward to seeing the pics.
I will give you a call later in the week
 
Stu lives about 25 miles from me and he has been so helpful and his stuff so well priced that I've bought a winch bumper, roll cages style light bar, tree/rock sliders and front light covers. I then asked him to make two things for me that were not on his list, the rear light bar and rear light covers.

The anti roll bar style light bar has 7 front light brackets and 2 side brackets. The wires sticking out are ready to accept the lights. The rear light bar has space for 5 lights which will be 2 rear spots, left and right (indicator/fog repeater/brake light repeater) and a central low power LED light.

Stu will fit whatever number of light brackets you like and the holes are drilled so that you can feed the wires through without them being visible (as you can see in the images). The rear light bar has the wires for the 5 individual lights actually hidden through it and sticking into the rear cab... The same for the anti-roll bar style light bar.

Here is everything but the tree sliders (which should hopefully be on tomorrow after I've got the new tube outriggers on.


Rear light bar and rear light covers:

IMG_7537.JPG



Rear light covers closer look:

IMG_7538.JPG


IMG_7539.JPG



Rear light bar closer look:

IMG_7540.JPG


IMG_7541.JPG



Front light covers and winch bumper:

IMG_7542.JPG


IMG_7543.JPG



Front anti roll bar style light bar (with 4 spots and 2 fogs):

IMG_7546.JPG


... and a couple of the anti roll bar light bar when it first went on:

1239345_10201744156983480_171542991_o.jpg


1266721_10201744157063482_1997234367_o.jpg
 
Last edited:
Titch1987 said:
Thank you for the pics rear light bar looks great
Click to expand...

I told him it would :D

The rear light bar is designed with the bolts going through the body and then there are plates inside. That way it stops nasty little scrotes coming along and unbolting your lights. If you are just having normal lights it will be great if you want something heavy or to allow people to grab it you might want to ask Stu to add one or two stabiliser bars from the light bar to join with the roof top. Likewise if you want your lights to hang from the bar you might want the bar to angle upwards at 45 degrees to make the bar higher where the lights would be. Basically he'll adjust it to your design which is one of the big advantages of Stu's services.
 
Last edited:
Adam1979 said:
Love the look of that roll cage/light bar, but looking at mine it would not fit on with a snorkel would it??
Click to expand...

I can't take the credit for the light bar/ roll cage lookalike.
I bought it about 1year ago as flat pack, it come bent ready for welding.
All I did was weld it and paint it and fit it.
My bender is not that good so will not be making any more of them unfortunately.
 
You must log in or register to reply here.

Similar threads

WoodyO
For Sale Series: Winch bumper & Zeon 10S winch
Replies
3
Views
493
kevstar
kevstar
dag019
Wanted Husky winch bumper
Replies
1
Views
922
dag019
dag019
julianf
For Sale Disco 1 winch bumper - £70 (DA5621)
Replies
5
Views
781
julianf
julianf
R
Lashing rings
Replies
2
Views
379
rubix101
R
dag019
Fitting a Husky Winch
Replies
8
Views
623
dag019
dag019
Back
Top