90 / 110 door striker
- Thread starter APLandy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hicap phill
Well-Known Member
- Posts
- 16,237
- Location
- Wiltshire
No photo attached…
What does the catch look like?
There are a few strikers
What does the catch look like?
There are a few strikers
Sorry. I’ll try it again.
Attachments
First of all you are doing that the wrong way round. You should be fitting the superior series split door to defender not the other way around.
And secondly although @Hicap phill is usually a trustworthy character do you not just need the standard striker plate FQB500130?
Hicap phill
Well-Known Member
- Posts
- 16,237
- Location
- Wiltshire
Don’t forget if you use the above striker a spacer will be needed. You can also get shims.
Earlier striker from 90 door
Split 90 door.
Pros & cons …
90 doors have wind up full windows
90 split door have slide windows but are very simple.
Earlier striker from 90 door
Split 90 door.
Pros & cons …
90 doors have wind up full windows
90 split door have slide windows but are very simple.
I stand corrected. There are many, the one I linked must be the superseded version. As that what I was directed to when I looked up the old part in my manual.
90/110 split doors are what every Land Rover aspires to. The correct sliding windows but the benefit of an Ali frame that doesn’t rust away, combined with a continuation of the galvanised tub capping.
Nobody needs fancy modern windows that go up and down!
Thanks - cost is a major factor for using these doors for now. The doors are lift up handle type and have the galvanised piece on them so just the window looks wrong...
