4th Injector on Diesel

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ShaunPDisco said:
Well finally trying to sort out my previous mishap of clamping the wire in the manifold.

Problem is both wires seem to be the same and dont know which way to connect. My guess is, as they are not differet it doesnt matter. Any comments??
Click to expand...

You will have to suck it and see. Question would be why you cut both wires at same time, unless trapping them severed them both of course. They power a coil when needle lifts it changes the magnetic state creating a pulse. Whether opposite current flow through the coil would have any effect i don't know. One for the electronics lads.
 
ShaunPDisco said:
They had seperated afterbeinng clampled and running the engine. Got enough to put them back together but just dont know which was to which!!
Click to expand...

There must be some witness marks where the outer was flattened or a slightly angled cut surely. Otherwise it's 50/50 chance of being correct. Don't think it will make any difference anyway.
 
You must log in or register to reply here.

Similar threads

JT_spark
Another P38 2.5DSE 4th injector Question
2
Replies
28
Views
3K
JT_spark
JT_spark
Keith_L
Disco 2 Door speaker not working
Replies
6
Views
479
discool
discool
Forgotthelandinggear
Injector Pump leaking Diesel
2
Replies
27
Views
2K
tottot
tottot
A
Freelander Diesel injector pump leak
Replies
0
Views
536
Andy Ben
A
G
Brake servo on a 2A Diesel ?
Replies
11
Views
703
grewth
G
Back
Top