P38A 4.6 HSE Starting/Sync Issues Help Needed Essex

Lukas018 · Feb 22, 2020

This is the circuit board inside my dads one.

So I need one with either a yellow or green dot providing it has the circuit board set up as @brianp38dse photo?

brianp38dse · Feb 22, 2020

Lukas018 said:
This is the circuit board inside my dads one.

So I need one with either a yellow or green dot providing it has the circuit board set up as @brianp38dse photo?

Yes you need a different one genuine jlr ones are about £300 new or as mentioned Martyuk`s one for £80 or my mod for under a tenner.

Datatek · Feb 22, 2020

Lukas018 said:
This is the circuit board inside my dads one.

So I need one with either a yellow or green dot providing it has the circuit board set up as @brianp38dse photo?

The Dots are not reliable, if you buy off Ebay, you need to see the circuit board as there are unscrupulous sellers fitting old guts in newer cases or changing the dots.

Grrrrrr · Feb 22, 2020

Lukas018 said:
This is the circuit board inside my dads one.

So I need one with either a yellow or green dot providing it has the circuit board set up as @brianp38dse photo?

Only green works properly. Not seen many yellow.

RangeRoller dt · Feb 22, 2020

Were making L322s by time they brought them out.

brianp38dse · Feb 23, 2020

RangeRoller dt said:
Were making L322s by time they brought them out.

Yes the l322 had been out for a few years when they bought out the last up grade, which say`s they new there was an issue but would fleece owners rather then do a recall

Lukas018 · Feb 23, 2020

We put new battery one all works then it kept blowing fuse 26 in the engine wen went to pull away?

Any thoughts?

Grrrrrr · Feb 23, 2020

Lukas018 said:
We put new battery one all works then it kept blowing fuse 26 in the engine wen went to pull away?

Any thoughts?

Does it not say what 26 is on the fusebox lid?

Lukas018 · Feb 24, 2020

Grrrrrr said:
Does it not say what 26 is on the fusebox lid?

Engine Management System but it blows as you pull away, that's what I don't understand, if anyone has had this before if they knew what is could be?

P38A 4.6 HSE Starting/Sync Issues Help Needed Essex

Lukas018

Well-Known Member

Attachments

brianp38dse

Well-Known Member

Datatek

Well-Known Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

RangeRoller dt

Well-Sprung Member

brianp38dse

Well-Known Member

Lukas018

Well-Known Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

Lukas018

Well-Known Member

Similar threads